Flexo CTP Machine Digital Flexo Plate Making Machine
Model: EcooSetter FL-800
Features:
Drum auto balance: Auto balance system of drum takes no more than 5 seconds to adjust
drum balance block to a position, make the drum stable in high
speed rotation.
Auto switch of laser channel: When any laser channels breaks down, laser channel auto switch
system can continue output through the longest consecutive channel
that remains working to ensure non-stop production.
Linear motor: More accurate, more simple and more reliable.
Dynamic autofocus: Keep accurate focus constantly to ensure sharp dot.
Specifiction:
| Model | FL-800E | FL-800S |
| Laser Channel | 16-channel | 32-channel |
| Output Speed | 1.25m2/h | 2.5m2/h |
| Max. Breadth | 790mm x 690mm | 790mm x 690mm |
| Plate Thickness | 0.14mm – 2.84mm | 0.14mm – 2.84mm |
| Laser Power | High power semiconductor laser diode |
| Plate Type | Digital relief flexo plate(water-wash), Digital flexo plate
(water-wash), Digital flexo plate (solvent-wash) Steel based
digital plates (Water/alcohol washable) |
| Application | Label and trademark |
| Resolutions | 4000dpi |
| Plate Loading | Manual load and unload |
| Interface | USB2.0 |
| Focus adjust | Dynamic auto-focus |
| Device Size | 1610x910x980mm(WxDxH) | 1610x910x980mm(WxDxH) |
| Net Weight | 800Kg | 800Kg |
| Power | 220V/50Hz, 60Hz, mainframe 1.5KW+Vacuum 2.0KW |
| Environment | Recommended temperature: 15-30℃ Humidity: 40%-70% |
FAQ:
1. What are your main products?
Our main products are the Prepress 4up and 8up Online/Offline
Thermal CTP, CTCP, VLF CTP and CTCP, FlexoCTP, Processor, Offset
Plates, inks, blankets, postpress packing equipments and so on.
There are over 3000sets CTPs installed worldwide. Our partners in
USA, Canada, Mexico, Colombia, Turkey, Hungary, South Africa and so
on are very pleased with our technician support service and product
performance.
We also have five offset plates production lines producing the
thermal CTP plate(single and double layers), positive CTCP
plates(single and double layers) and Chemistry free CTP plate.
You can get the prepress equipments and consumables all in one and
no worry about the after-sales service from our company.
2. Where is your factory?
Our CTP machine factory is located in Hangzhou city, which is about
1.5 hour by train from Shanghai.
You are warmly welcomed to visit our factory!
3. What is your warranty for the CTPs?
One years' Laser Head and main spare parts for the CTP.
4. What is the Lead Time?
Usually 30 days, and we will try our best to meet your demands.
5. Can you also supply the Workflow and RIP?
Yes, we can provide the Workflow Brain New and RIP Compose V9.
6. What about the Installation and after-sales technician support?
Our engineer can go to help the installation and provide the
necessary training. The buyer should take the round air plane
tickets and service charge and the local accommodation cost. Any
problems or questions, we will be at your disposal 7x24 hours.
