5G Router & Industrial Ethernet Switch witn Port VLAN and IEEE
802.1Q VLAN
Industrial Ethernet Switch Advantages:
- Support 8x10/100/1000Mbps RJ45 Ports, 4 x 1.25G SFP ports and 1 x
5G uplink.
- Gigabit interface 10/100/1000Mbps adaptive, full/half duplex,
MDI/MDIX adaptive mode.
- Support QoS, IEEE802.1p and ToS/DiffServe to improve communication
quality.
- Support different levels of network management of SNMP V1/V2C.
- Real-time broadcast storm monitoring and control (including
broadcast, multicast,
- unknown unicast and other storm type detection)
- Embedded Web server, which can be managed and configured remotely
through browser.
- Dynamic IGMP Snooping support to filter multicast traffic.
- Meet the requirements of trouble-free operation in strong
electromagnetic interference environment.
- Full duplex flow control and half duplex back pressure flow control
- Port VLAN and IEEE 802.1Q VLAN
- Trunk port convergence
- Online firmware update
Overview
This 5G Router & Industrial Ethernet Switch communication route is
specially designed and developed
for the application of power high-speed communication network,
using 5G industrial security module
and domestic two-layer switching chip.
The dual uplink scheme of optical fiber and 5G is realized, which
can effectively reduce the wiring
difficulty and maintenance cost of distribution automation business
site, and the optical fiber uplink
can ensure the stability and reliability of data transmission. It
provides a high-end industrial Ethernet
communication solution for flexible power and industrial
application requirements, breaks through the
bottleneck of 100M backbone network communication, makes power
communication smoother, more
reliable and faster, and meets the continuous innovation needs of
customers to improve value-added
applications.
This communication route can be used for simple application mode of
plug and play, and also for
complex network management mode, so as to meet various needs of
users. All electrical ports support
auto-negotiation, 10/100/1000Mbps full-duplex and half-duplex, flow
control, Auto-MDI/MDI-X and other
functions. Through Web management or SNMP management, this
communication route can provide
advanced management functions, such as ring network protection,
virtual local area network, Trunk,
Quality of Service, IGMP Snooping, rate control, port mirroring,
static MAC address forwarding table,
diagnostic function, Email/Relay fault alarm and firmware online
upgrade, and a series of common
advanced management functions.
This communication route has 8 10/100/1000Mbps adaptive electrical
ports, 4 Gigabit optical ports
with 12 ports and 1 5G interface. Each gigabit optical port
supports SFP optical port module, the
product supports VLAN of 802.1Q, the minimum granularity supported
by port speed limit is 64K,
and the MAC address table of 8K entries is supported.
Application
- Bandwidth management
- 5G automatic networking
- Backup and recovery of system configuration parameters
- Friendly graphical interface, supporting one-button factory
settings recovery.
- Support port mirroring for online debugging.
- An Effective Network Diagnosis Tool
- Power failure and broken fiber storm alarm
- Fast recovery of port changeover connection
- Real-time network time synchronization
- Restrict IP access and manage communication routes in the network.
- Remote management configuration
- Support use Web pages, console programs and Windows applications
for management configuration.
- Support standard SNMP protocol management
Technical Indexs
| Appearance and heat dissipation |
| Size | 74mm * 160mm * 122mm |
| Material | Aluminum Alloy |
| Cooling mode | No fan, silent |
| Mounting option | DIN Rail |
| Power supply and environment |
| Power input | DC12V/24V/48V |
| Power port | 5-pin Terminal Block, Redundant Power |
| Power consumption | less than 20W |
| Humidity | 5% ~ 95% without condensation |
| temperature grade | industrial grade, -40 ~ 85℃ |
| Protection level and availability |
| Protection level | EC/EN6100-4 industrial protection |
| MTBF | > 50000 hours |
| Connectors |
| Gigabit Ethernet Port | 8 x 10/100/1000Mbps |
| Gigabit Fiber Port | 4 x 1000BASE-X |
| 5G antennas | 2 |
| Console Port | 2 |
| Other | 1 x USB, 1 x SIM, 1 x Reset |
| operating system |
| Operating system | Linux |
| Online upgrade | support |
| management | Web-based network management |
| Switch protocols and functions |
| Remote access control | support |
| Standard protocols | IEEE802.3u, IEEE802.1p, IEEE802.1q and IEEE 802.3ad |
| Multicast | supports IGMP and IGMP Snooping multicast protocols. |
| VLAN | supports VLAN division. |
| QoS | supports QoS management. |
| Ports | Supports port aggregation, port rate limitation and broadcast storm
suppression. |
| IPv | supports IPv4 static routing settings |
| ACL | supports port MAC address binding |
| Ring network protection | supports |
| Port mirroring | supports |
| 5G Features |
| NR features | supports SA/NSA networks. |
| 4G/5G | automatic switching between different 4G/5G networks. |
| Modulation mode | uplink and downlink 256QAM |
| cryptographic algorithm | supports |
| 5G output power | N41: 23dBm±2dB N78: 23dBm+2dB/23dBm-3dB N79: 23dBm+2dB/23dBm-3dB |
| receiving sensitivity | N41: 2 antenna 10mhz/30khz SCS <-95.1dbm N78: 2 antenna 10mhz/30khz SCS <-96.1dbm N79: 2 antenna 40mhz/30khz SCS <-89.7dbm |
| LED |
| Function | LED | Status | Definition |
| Power | PWR1 | ON | PWR1 is connected and supplied normally. |
| OFF | PWR1 is not connected or the power supply is abnormal. |
| PWR2 | ON | PWR1 is connected and supplied normally. |
| OFF | PWR1 is not connected or the power supply is abnormal. |
| RUN | RUN | Flashing | system is operating normally. |
| ON/OFF | Abnormal system operation |
| Alarm | ALM | ON | Equipment alarm |
| OFF | Equipment without alarm |
| Gigabit Fiber Port | G9 ~G12 | ON | The port has established a valid network connection. |
| Flashing | The port has network activity. |
| OFF | The port has not established a valid network connection. |
| Each Ethernet RJ45 port has two indicators, the yellow indicator is
the port rate indicator and the green indicator is the connection
status indicator. |
| Ethernet Port | 1000M (Yellow) | ON | 1000M working state |
| OFF | 10M/100M working state |
| L/A | ON | The port has established a valid network connection. |
| Flashing | The port has network activity. |
| OFF | The port has not established a valid network connection. |
Orrdering Information
| Model | Description |
| LNK-IMC408G-5G-R | 5G Router & Industrial Ethernet Switch communication route, with
8x10/100/1000Mbps RJ45 Ports, 4 x 1.25G SFP ports and 1 x 5G
uplink. |
Interface and component description
| 1 | 5G antenna | 2 | power input terminal |
| 3 | reset button | 4 | USB3.0 debugging port |
| 5 | debugging network port | 6 | SIM card holder |
| 7 | grounding screw | 8 | debugging serial port |
| 9 | LED indicator light | 10 | Gigabit Fiber port |
| 11 | Gigabit Ethernet port | 12 | DIN-Rail mounting clip |
