PRODUCT DESCRIPTION
The second generation brushless non-spring barrier gate is a
breakthrough technology that solves the technical problem of
traditional barrier gate requiring spring balance to operate
smoothly and achieve sufficient torque. The second generation
brushless non-spring barrier gate uses the latest developed
inflatable arm, which is lightweight, fast in operation, and can
ensure long-term stable operation even for long barrier arm. The
inflatable arm also solves many other problems:
1. Convenient transportation (greatly reducing the cost of
transportation;
2. Lightweight (greatly improving the lifetime of the barrier motor
and reducing the failure rate, especially for non-spring motor with
absolute advantages);
3. Not afraid of car collisions and typhoons damaging the barrier
arm;
4. Truly achieving no harm to the car and people.;
5. Saves storage space and rent.
The 2nd generation brushless non-spring barrier gate adopts the
industry’s most fashionable design of a one-piece barrier housing
without cover, with integrated mechanical and electrical design,
left and right direction can be quickly interchanged, Fifth-level
gear large speed ratio design, large torque and high efficiency,
can bear 6m two fence arm, respond immediately at any angle without
jerking. The high-power and high-torque permanent magnet rare earth
DC brushless motor design, ultra-intelligent driver, and
intelligent release of reverse voltage without damaging components
can completely achieve a military-grade life span of more than 5
million times. Truly achieve high-end products that are safe,
stable, reliable, durable, innovative, and of high quality!
FUNCTIONS
1.Operation speed can be adjusted.
2. Slow up and slow down can be adjusted.
3. The limit angle can be adjusted.
4. Left and right direction can be quickly interchanged.
5.The barrier arm can be manually operated in case of power
failure.
6.418 frequency learning code anti-copy remote controller.
7.Infrared photocell sensor I/O signal input function.
8.Loop detector and radar I/O signal anti-collision signal input
function.
9.Up,down and stop I/O signal input function.
10,Counting (fleet) function.
11.LED light lo signal output function.
12.Traffic light lo signal output function.
13.Up and down in place, normally open and normally closed signal
output function.
14.RS485 communication output function.
15. Delay arm drop function.
16. Arm auto-reverse function.
17.Automatic lifting function when power is off (requires
additional power storage module).
18, 10 port single-key cycle up and down function.
19.Loop detector normally open and normally closed function.
21.Anti-collision alarm function (requires additional fee,
installation of alarm and sensor).
22.Fire linkage signal input function.
23.The l0 port closes the signal input function.
24. 24V storage battery input function.
TECHNICAL SPECIFICATION
| Model | DZ-2311 |
| Cabinet size | 300*288*1000(mm) |
| Working Temperature | -35℃~+65℃ |
| Power Supply | DC24V; AC110V/220V, 50/60 Hz. |
| Open/close Speed | 6Sec-17Sec(Adjustable) |
| Rated Power | 350W |
| Driving Method | DC brushless motor |
| Humidity | ≤90% |
| Remote Control Distance | ≤100m(open,sunny weather) |
| Protection Grade | IP54 |
| Motor No-load speed | 1850r/min |
| Max Boom Length | 8m |
