DX8362 Single Combustion Testing Equipment for Building Materials or Products
Comply with the standard:
It meets the requirements of GB/T 20284-2006 standard "Monomer
Combustion Test of Building Materials or Products" and the EN13823
"Monomer Combustion Test Method (SBI)" test standard requirements.
Scope of application:
A method used to determine the fire reactivity of building
materials or articles (excluding flooring materials and products
specified in EC Decision 2000/147/EC) in the Single Combustion Test
(SBI).
Performance parameters:
The equipment includes a combustion test room, a control room, a
trolley, a smoke exhaust pipe, a data collection and analysis
device, and a gas supply control device.
1.Combustion test room: L3000*W3000*H2400(MM), the top of the room
is connected with the sampling pipe collection hood and smoke
exhaust pipe, there is a space under the cart for air to enter and
exit naturally. During the test, the heat released by the
combustion of the sample and the combustion products should be
discharged from the smoke exhaust pipe and built with a brick wall.
2. Ignition source, 31KW propane right-angle sandbox burner (side
length 250MM and height 80MM) placed in the vertical corner of the
cart.
3. A comprehensive sampling area is provided in the smoke exhaust
pipe for placing sensors and sampling pipes.
4. Smoke exhaust speed: 0.50 cubic meters/s ~ 0.65 cubic meters/s.
5. The ambient temperature measurement in the laboratory: K-type
armored thermocouple with a diameter of 1MM, environmental pressure
test: ±200Pa.
6. Exhaust flue temperature measurement: imported K-type armored
thermocouple with a diameter of 0.5.
7. Temperature measurement accuracy: 0.5°C.
8. High-precision pressure sensor for exhaust flue, with an
accuracy of ±2Pa
9. Time recording system accuracy: 0.1S.
10. Test time: 1~30 minutes adjustable setting.
11. The smoke density measurement system can measure the smoke
density in the test process.
12. The gas analyzer and key components are all imported
originally.
13. With embedded computer and 8.4-inch LCD display, with TCP/IP
and RS-232 communication interface options
14. Oxygen measurement:
1. Measuring range: 0-25%
2. Signal output: 4-20mA;
3. Response time T90: ≤2S;
4. Ambient temperature: 0-45°C;
5. Relative humidity: <90% (no condensation);
6. Linearity: <±0.1% O2;
7. Zero drift: 0.05% O2 (one week);
8. Repeatability: <±0.02% O2;
15. Carbon dioxide (CO2) measurement:
1. Measuring range: 0-10%
2. Refoldability: <±1% control cabinet internal structure
Zero drift: ≤2%/week
Range drift: ≤2%/week
3. Linearity: <±1%
4. Response time: T90≤2 seconds
16. The data acquisition system can collect and record test data
such as oxygen concentration, carbon monoxide concentration,
temperature, smoke density, heat release rate, mass loss rate,
etc., which can be saved.
