Automatic IC Card Milling Machine YIM-4000+
1. Introduction of Automatic IC Card Milling Machine YIM-4000+
Automatic IC Card Milling Machine YIM-4000+ is designed for milling
the slot or cavity for IC chip implanting on plastic card surface
in a precise and speedy way. It features robust design, reliable
performance and fully automatic operation. It is controlled by PLC,
which can well ensure easy parameter setting and stable
performance.
2. Basic configuration of Automatic IC Card Milling Machine YIM-4000+
Card feeding magazines (two) –slot milling station #1-slot milling
station #2-depth detection stations (two)(optional)-dust absorber
-Card Collection magazines (two)
Double-card conveying system can ensure that two cards are milled
at the same time in a speedy way.
Three-shaft positioning control system drives servo motor to mill
the slots of plastic cards.
The parameters of each shaft can be adjusted respectively, and the milling precision can’t be affected by the
diameter tolerance of the milling tool.
If such problems as card overlapping, wrong card direction or wrong
milling depth (checked by the optional depth detection station),
the machine will automatically alarm and stop.
3.Technical parameters
Power supply | AC 380V 50/60 HZ | Control method | PLC + Servo system |
Total power | 6.0 KW | Card specification | ISO CR80/IEC7810 54x85.6mm |
Air source | 6kg/cm² (dry) | Dimension | L1750xW800xH1850 mm |
Air consumption | Approx. 50L/min | Milling precision | X/Y: ±0.015mm Z: ±0.010mm |
Weight | Approx 650KG | Operator number | 1 |
Speed | 3500~4500pcs/h | | |
