BS 6323-3 HFS3 Seamless Steel Tube for Mechanical Applications

BS 6323-3 HFS3 Seamless Steel Tube: Hot Finished Seamless Steel Tubes For Mechanical

Introduction

BS 6323-3 HFS3 is a British Standard that specifies the requirements for hot finished seamless steel tubes for mechanical purposes. These tubes are widely used in various industries due to their excellent mechanical properties and durability. This article will provide an overview of the material, specification, key features, chemical composition, mechanical properties, steel grade, application, and possible alternative grades of BS 6323-3 HFS3 seamless steel tubes.

Material and Specification

BS 6323-3 HFS3 seamless steel tubes are manufactured using high-quality carbon and alloy steels. These tubes are produced through a hot finishing process, which involves piercing a solid billet and then rolling it into a seamless tube. The tubes are further subjected to heat treatment to enhance their mechanical properties.

The specification of BS 6323-3 HFS3 seamless steel tubes includes various parameters such as dimensions, tolerances, and technical delivery conditions. These tubes are available in different sizes and thicknesses to cater to the diverse requirements of mechanical applications.

Key Features

BS 6323-3 HFS3 seamless steel tubes offer several key features that make them suitable for mechanical applications:

1. High Strength: These tubes exhibit excellent strength properties, ensuring reliable performance in demanding mechanical environments.
2. Good Toughness: The tubes possess good toughness, enabling them to withstand high-stress conditions without failure.
3. Superior Surface Finish: BS 6323-3 HFS3 tubes have a smooth and uniform surface finish, which enhances their aesthetic appeal and facilitates easy installation.
4. Dimensional Accuracy: The tubes are manufactured with precise dimensions and tight tolerances, ensuring compatibility with various mechanical components.
5. Corrosion Resistance: The steel used in these tubes is resistant to corrosion, making them suitable for applications in corrosive environments.

Chemical Composition

The chemical composition of BS 6323-3 HFS3 seamless steel tubes is as follows:

Mechanical Properties

The mechanical properties of BS 6323-3 HFS3 seamless steel tubes are presented in the following table:

Steel Grade

BS 6323-3 HFS3 seamless steel tubes are available in various steel grades, including but not limited to:

• E235
• E355
• E470

These steel grades offer different levels of strength and toughness, allowing users to select the most suitable grade for their specific mechanical applications.

Application

BS 6323-3 HFS3 seamless steel tubes find extensive application in various mechanical industries, including:

1. Automotive: These tubes are used in the manufacturing of automotive components such as axles, drive shafts, and suspension systems.
2. Machinery: BS 6323-3 HFS3 tubes are employed in the production of machinery parts, including gears, cylinders, and hydraulic systems.
3. Construction: These tubes are utilized in construction equipment, such as cranes, excavators, and scaffolding.
4. General Engineering: BS 6323-3 HFS3 seamless steel tubes are widely used in general engineering applications, including the fabrication of frames, supports, and structural components.

Possible Alternative Grades

While BS 6323-3 HFS3 seamless steel tubes offer excellent performance, there are alternative grades available in the market that may suit specific requirements. Some possible alternative grades include:

• ASTM A519
• DIN 2391
• JIS G3445

It is important to consult with experts or refer to specific standards to determine the most suitable alternative grade for a particular application.

Haiyan Sanxin Steel Pipe Factory is a leading manufacturer of steel pipes in China. Located in a region with excellent geographical advantages, the factory is situated close to the Zhoushan Port and Ningbo Port.

Our factory covers an area of more than 25,000 square meters and has been in the steel pipe manufacturing business for 20 years. Over this period, we have accumulated a wealth of professional experience, which has helped us establish ourselves as a trusted name in the industry.

At our factory, we specialize in the production of various types of steel pipes, including stainless steel pipe, carbon steel pipe, copper pipe, steel pipe,seamless steel pipe and welded pipe. Our expertise in this field is evident from the 12 patents that we hold, which demonstrate our commitment to innovation and excellence.

Q: Are you trading company or manufacturer ?

A: manufacturer,also can do trading.

Q: How long is your delivery time?

A: Generally speaking,it is 10-15 days if the goods are in stock,or it is 30-40 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples? is it free or extra ?

A: Yes, we could offer the sample for free charge but need pay the cost of freight.

Q: What is your terms of payment ?

A: Payment<=2000USD, 100% in advance. Payment>=2000USD, 30% T/T in advance ,balance before shippment.

If you have another question, pls feel free to contact with me.

TORICH INTERNATIONAL LIMITED