Nihon Kohden TEC-5602 Defibrillator Hook Bracket Plate Assembly
Introduction of Nihon Kohden TEC-5602 Defibrillator Hook Bracket Plate Assembly
The Nihon Kohden TEC-5602 Defibrillator Hook Support Plate Assembly
is a replacement part for the Nihon Kohden TEC-5602 Defibrillator.
Includes a support plate with hook to attach the defibrillator to a
mounting bracket or cart for easy access and storage.
The set is made from durable materials to ensure long-lasting
performance and reliability. It is easy to install and compatible
with the Nihon Kohden TEC-5602 defibrillator, providing a safe and
convenient way to store and access the device in a medical
environment.
It is important to periodically inspect and replace any damaged or
worn parts of medical equipment to maintain optimal operation and
safety. The Nihon Kohden TEC-5602 Defibrillator Hook Support Plate
Assembly is an essential component to ensure proper operation of
the defibrillator and effective use in emergency situations.
Nihon Kohden TEC-5602 Defibrillator Hook Bracket Plate Assembly Specification
| Product Name | Nihon Kohden TEC-5602 Defibrillator Hook Bracket Plate Assembly
|
| Brand | Nihon Kohden |
| Application | Nihon Kohden TEC-5602 Defibrillator |
| MOQ | One piece |
| Warranty | 90 days |
| Material | Plastic |
| Color | White |
General operating precautions of Nihon Kohden TEC-5602 Defibrillator
1. To use the instrument safely and effectively, you must fully
understand its operation.
2. When installing or storing the instrument, take the following
precautions:
(1) Avoid moisture or contact with water, extreme atmospheric
pressure, excessive humidity and temperature, poorly ventilated
areas, and dusty, salty or sulfuric acid air.
(2) Place the instrument on a flat ground. Avoid vibrations and
mechanical shocks, even during transportation.
(3) Avoid placing it in areas where chemicals are stored or where
there is a risk of gas leakage.
(4) The frequency and voltage of the power cord source to be
applied to the instrument must meet the product specifications and
have sufficient current capacity.
(5) Select a room with adequate grounding facilities.
3. Before the operation
(1) Verify that the instrument is in perfect working order.
(2) Check that the instrument is properly grounded.
(3) Check that all cables are connected correctly.
(4) When the instrument is used in combination with other
instruments, take special care to avoid misdiagnosis or other
problems.
(5) All circuits used for direct connection to the patient must be
carefully checked.
(6) When using a battery-operated model, check that the battery
charge is acceptable and the battery condition is good.
4. During operation
(1) Maintain constant and careful monitoring of the instrument and
the patient.
(2) Turn off the power or remove electrodes and/or sensors as
necessary to ensure patient safety.
(3) Avoid direct contact between the instrument case and the
patient.
5. Turn off after use
(1) Turn off the power and return all controls to their original
positions. (2) Gently disconnect the cables; do not disconnect them
forcefully.
(3) Clean the instrument and all its accessories for next use.
Thank you so much for your attention.If you're interested in Nihon Kohden TEC-5602 Defibrillator Hook Bracket Plate Assembly,feel free to contact us .Thank you .
