BP93420-III Pressure Transmitter
Introduction of industrial pressure sensor transmitter:
BP93420-III Industrial pressure sensor transmitter adopts diffused
silicon pressurized oil core as the sensitive element, and the
signal processing circuit uses the pressure transmitter to convert
the pressure signal into the standard output signal.Product parts,
semi-finished products, finished products of strict testing and
aging screening, stable and reliable performance, strong
anti-interference ability. The pressure interface of the pressure
transmitter comes in many forms. The product is easy to install and
has high anti-vibration and anti-impact performance.Widely used in
process control, petroleum, chemical, electric power, hydrology,
aviation, aerospace, automobile and other industries.
Product Features of industrial pressure sensor transmitter:
1. Wide measuring range, diverse pressure interface forms.
2. IP65 protection level.
3. Various output signal forms.
| Performance Parameters of 2088 pressure transmitter sensor |
| Measurement Range | -100kPa…0kPa ~10kPa…60MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability | ≤±0.1%FS |
| Hysteresis | ≤±0.1%FS |
| Long-Term Stability | ±0.1%F.S/Year(Typical) ±0.2%F.S/Year(Maximum |
| Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Frequency Response | 2.4Khz |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | Cast aluminum |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex db IIC T6 Gb |
| Protection Rating | IP65 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~1kg |
1. When selecting a product, please ensure that the medium under
test is compatible with the contact part of the product.
2. When placing an order, please note that explosion-proof products
do not include a digital display.
3. When ordering a transmitter with an LCD or LED display head, the
power supply of the transmitter should not be lower than 20VDC.
4. In order to ensure the reliable operation of the product, it is
recommended that users install lightning protection devices on the
site and ensure that the product and the power supply are reliably
grounded.
5. Fluorine rubber o-rings rated operating temperature range for -
20 ℃ ~ 250 ℃. When operating temperatures fall below -20 ° C, EPDM
O-type sealing rings should be selected.
6. The cable does not come with default cable attached. If you
require cable, there are three materials to choose from. If no
specific instructions are given, polyethylene cable materials will
be used by default.If different cable materials are required,
please indicate in your order form.
7.In case of special requirements such as strong vibration,
instantaneous impact,strong electromagnetic or radio frequency
interference , please inform us and indicate in your order.
| Order Guide |
| BP93420XX | Pressure Transmitter |
| Code | Outline Construction |
| IB | General Pressure Transmitter | IX | Display Pressure Transmitter |
| IE | Shock-resistant Aviation Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter |
| IF | Moisture-proof Pressure Transmitter | IIE/IIIE | General/Display Pressure Transmitter |
| IN | Air Conditioning Dedicated Pressure Transmitter | | |
| IC | High-temperature Pressure Transmitter | | |
| IQ/IQT | Large Diaphragm /High-temperature Pressure Transmitter | | |
| Measurement Range | -100kPa…0kPa ~ 35kPa…3.5MPa |
| (0-X)Kpa or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | 2088 Industrial Casing |
| B5 | 2088 Industrial Casing with Display |
| B6 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
FAQ:
1. Q: What are the features of your pressure sensor transmitters?
A: Our pressure sensor transmitters are characterized by high
precision, durability, and excellent performance, with the option
for customization.
2. Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs
through our OEM and ODM services.
3. Q: What is your production capacity?
A: Our manufacturing facilities have the capability to produce up
to 30,000 pressure sensor transmitters per month, ensuring that we
can fulfill large-scale orders. However, it is advisable to contact
our sales team in advance for smooth production and delivery
scheduling.
4. Q: What's the typical delivery period?
A: Standard models typically have a delivery period of 5~8 working
days, while customized products may vary.
5. Q: How are the products priced? Any discounts?
A: We offer competitive pricing with discounts available for bulk
orders or long-term partnerships.
6. Q: What is the warranty of your products? And after-sales
service?
A: Our products come with a 24-month warranty from shipment date,
and our after-sales service ensures prompt responses within 24
hours along with remote instruction support via PC network.
