High Speed Printer Slotter And Die Cutter
| Model | 1600x3200 |
| Machine Speed(m/min) | 180 |
| Machine Max.speed (pcs/min) | 150 |
| Machine Max.feeder Size(mm) | 1600x3200 |
| Machine min.feeder Size(mm) | 450x760 |
| Machine Max. printer size (mm) | 1600x3100 |
| thick of printer Plate(mm) | 7.2 |
| Max. slotter Dep (mm) | 560 |
| Max. Thickness of Sheet(mm) | 15 |
Machine size (LxWxH)
| 21852x7370x2500 |
Rotary Die-Cutter Unit Features:
A. Die Cylinder (Lower)
● Ground and chromed high quality steel
● Dynamic balanced for stable running.
● Fixing hole distance is 50mm lateral.
● Creasing height is 22.60mm.
● Wooden die thickness is 13mm.
B. Anvil Cylinder (Upper)
● Ground and chromed high quality steel
● Dynamic balanced for stable running.
● Anvil cover thickness is 10mm,width is 252mm.
● Side to side oscillation of anvil cylinder( 50mm).
● Motorized gap adjustment between anvil roll and die cylinder.
C. Self-locking System Adopted for Pulling Roll Gap.
D. Cam bearing applied for the Pull Roll working, wear reduced and
run more stable.
E. Cutting Registration Adjust System
● Planetary gear system
● Cutting registration controlled by PLC and motorized, 360°adjust.
● Lateral registration controlled by PLC and motorized, range ±10mm.
F. Anvil Speed Compensating System with Dependent Motor, range ±3mm.
G. With Anvil Grinding System for Keeping Smooth.
Safety instructions
Before operating this machine, please read the following safety
guidance for complete understanding:
- Please operate this machine according to the manufacturer’s
guidance and your factory relative safety operation regulations.
- A clean and neat working area should be sustained.
- All the safety protection devices should be placed properly in
position and all the safety operation switches should be running
normally.
- Operators should wear suitable uniforms and use all necessary
safety devices (for example, to wear gloves when operating and
inspecting the machines)
- Fasten the loose hair and clothes to avoid contact with movable
equipment.
- Find out the damaged or worn parts of the machine and arrange the
experienced technicians to repair or adjust the machine.
- Remember never touch the moving equipment manually or with tools.
- Lock the power source and be sure the keys are at your hand when
making maintenances.
- Remind the non-duty persons to keep away far from the working area
when switching off or starting the machine.
.
