EPDM cold shrink tube for sealing cables in Floating Solar
Photovoltaics systems
Introduction:
EPDM cold shrink tube: applied in electrical power industry,
telecommunication industry or other tool product handle, eg.
bicycle handle etc. With it’s good performance: water-proof, Acid
and alkali resistance, seal, protection sleeve and low voltage seal
insulation under 1kv.
This is a product that is perfect to fixing a worn out grip on your
favorite rod. Also works great as a grip on a new custom build.
It’s easy to use at the video shows, simply slide the cold shrink
over the desired location and remove the core and you are done.
Seals tight and retains its resiliency and pressure even after
prolonged years of aging and exposure.
| Material technical parameters: | | No | Items | Test method | Unit | Test standard | Remarks | | 1 | Hardness (Shore A) | GB/T 531.1-2009 | Shore A | 43±5 | | | 2 | Tensile strength | GB/T 528-2009 | Mpa | 8±3 | | | 3 | Break elongation | GB/T 528-2009 | % | 800±200 | | | 4 | Tear strength | GB/T 529-2008 | kN/mm | 38±5 | | | 5 | Volume resistivity | GB/T 2439-2001 | Ω•cm | ≥1013 | | | 6 | dielectric strength | GB/T 1695-2005 | MV/m | ≥18 | | | 7 | dielectric Constant(50Hz) | GB/T 1693-2007 | / | ≤8 |
|
Specification:
| Materials | Inner diameter | After shrink length |
| EPDM | 50 | 305 |
| EPDM | 50 | 457 |
| EPDM | 77 | 457 |
| EPDM | 105 | 457 |
| EPDM | 116 | 600 |
EPDM cold shrink tube Features:
1. Simple installation, requires only workmans hands; No torches or
heat required.
2. Accommodates a wide range of cable sizes.
3. Good thermal stability; Excellent wet electrical properties.
4. Seals tight, retains its resiliency and pressure even after
prolonged years of ageing and exposure.
5. Improved tough rubber formulation to withstand rough
backfilling.
6. Resist fungus; Resists acids and alkalis; Resists ozone and
ultravilet light.
Application reference pic
FAQ
1. Who are we?
We are professional in cold shrink industry. Our products have been
exported to America, Australia, Egypt, Taiwan, India, Indonesia,
Egypt, Spain, Italy and Germany etc, Europe countries. Currently,
we already cooperated many famous companies in electrical and
telecommunication industry.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
