10L Planetary Vacuum Mixing Machine
Brief Introduction
It is suitable for mixing and dispersing the powder and liquid of
various common types of batteries, and finally obtains evenly mixed
battery slurry, and is also very suitable for high-viscosity
technical processes. Viscosity range adapted to operating
conditions ≤ 1200000 cP.
Key Features
● Vacuum environment, effectively eliminating air bubbles generated
by the mixing process, good vacuum holding effect.
● Jacketed mixing bucket design, can be filled with cooling water,
suitable for various process requirements.
● Form of jacket for temperature adjustment, the single-layer
jacket for bucket wall is used for cooling or heating; and the
single-layer jacket for bucket bottom is used for cooling or
heating.
● Over temperature alarm system, safer and smarter.
● Operation failure stop: the frequency converter is self-provided
with overload, overcurrent, overvoltage, leakage of electricity,
short-phase protection.
● Variable cross-section Non-prismatic mixing design can make
slurry get better mixing effect.
● Touch screen, simple operation, high automation.
Technical Parameters
| Model | STC-EXJ-10L |
| Power supply | AC 3×380V±5﹪, 50Hz |
| Machine total power | ＞5.2KW |
| Dimension | L1530 * W950 * H1792mm |
| Weight | 900kg |
Part 1. Lower bucket component
| Design volume | 16L |
| Effective volume | 5-10L |
| Bucket inner diameter | 310mm |
| Bucket inner depth | 220mm |
| Bucket material | 304 stainless steel |
| Form of jacket for temperature adjustment | The single-layer jacket for bucket wall is used for cooling or
heating; and the single-layer jacket for bucket bottom is used for
cooling or heating. |
| Interface of jacket for temperature adjustment | “G1/2”, with quick-open joint, jacket pressure resistance ≤0.4MPa. |
| Circulatory system of jacket for temperature adjustment | User provided, recommended jacket inlet temperature≤8℃, cooling
water flow > 7L/Min. |
| Form of discharge | One “G1” three-piece discharge ball valve at the bottom of the
bucket. |
| Design ambient temperature | -10～+120°C |
| Mode of Movement | Mobile on casters |
Part 2. Mixing component
| Operating frequency | 5-50Hz |
| Mixing power | 2.2KW |
| Speed of mixing paddle | 11-116rpm |
| Speed of planetary gearbox | 5-53rpm |
| Diameter of mixing paddle | 161mm |
| Pattern of mixing paddle | Non-prismatic twist type, 90° spiral line |
| Material of mixing paddle | 304 stainless steel |
| Linear speed of mixing paddle | 0.08-0.8m/s |
| Quantity of mixing paddle | 2 pieces |
| Distance between paddles | 7.5±2.5mm |
| Distance between paddle and bucket wall | 3±1.5mm |
| Distance between paddle and bucket bottom | 2.5±1mm |
Part 3. Dispersed component
| Operating frequency | 5-50Hz |
| Dispersion power | 3KW |
| Speed of dispersion | 613-6130rpm |
| Diameter of dispersion disc | 70mm |
| Pattern of dispersion disc | Sawtooth pattern |
| Material of dispersion disc | 304 stainless steel |
| Speed of dispersion line | 2-22m/s |
| Quantity of dispersion disc | 2 pieces |
| Quantity of dispersion axes | 1 piece |
Warranty
1 year warranty with lifetime support. Man-made damage is not
covered.
FAQ
1. Are you a manufacturer ?
A: Yes, our factory is located in Shenzhen, China.
We have more than 10 years experience for manufacturing battery lab
research equipment. We owns a professional R& D department.
2. Do you accept customized product ?
A : Yes. Most of our products can be customzied to meet different
requirements.
3. Will you provide test video before dispatch ?
A : Yes, we take test video for every equipment before dispatch,
which will display how to use it.
4. Can you offer overseas installation service ?
A : Yes, we can dispatch professional engineer for on-site
installation service.
