Product name:
28*110mm Size Cold Shrink Stress Relief Tubes For Antenna Joint
Description:
28*110mm size cold shrink tube is an open-ended cold shrink rubber
sleeve, which is pre-expanded by the factory and assembled onto a
removable core. The core is removed when the tube is positioned for
installation over an online connection or termination lug. It
provides a tight water proofing property for termination and
joints.
We have more than ten years experience of cold shrink tube line
with professional technical knowleage and good performance.
Cold shrink stress relief tubes Features:
1:Excellent weathering properties.
2:Excellent abrasion resistance cold shrink tube
3:Good seal and insulation
4:UV and Ozone resistance
Introduction:
EPDM cold shrink tube: applied in electrical power industry, telecommunication industry or other tool product handle, eg.
bicycle handle etc. With it’s good performance: water-proof, Acid
and alkali resistance, seal, protection sleeve and low voltage seal
insulation under 1kv.
| Material technical parameters: |
| No | Items | Test method | Unit | Test standard | Remarks |
| 1 | Hardness (Shore A) | GB/T 531.1-2009 | Shore A | 43±5 | |
| 2 | Tensile strength | GB/T 528-2009 | Mpa | 8±3 | |
| 3 | Break elongation | GB/T 528-2009 | % | 800±200 | |
| 4 | Tear strength | GB/T 529-2008 | kN/mm | 38±5 | |
| 5 | Volume resistivity | GB/T 2439-2001 | Ω•cm | ≥1013 | |
| 6 | dielectric strength | GB/T 1695-2005 | MV/m | ≥18 | |
| 7 | dielectric Constant(50Hz) | GB/T 1693-2007 | / | ≤8 |
|
Products picture for your reference
