SD-200 Manual glue dispenser
1. Tech Data
Time Display: LCDAir pressure display: pressure gaugeOutput pressure: adjusted by rotary knobSuction pressure:micro-adjustable valveTime adjustment: buttonOperation mode: manual/automatic/circle workGluing precision: +/- 0.01mlDispensing frequency: ≥ 800 times/minDispensing needle:1-6(customized)Moving mechanism:cantileverSpeed of X/Y/Z axles: 0-200mm/s(adjustable)Repeat accuracy: ±0.02mmGluing accuracy: ±0.01mlDimension: L610 X W500 X H600mmWeight: 40 kgVoltage: AC220V 50HzWorking principle
3. Glues Demanded:
solder paste, silver paste, UV glue, epoxy, intant glue, silicone
and other liquid glue
| Model No.: | SD-200 |
| Time display | LCD |
| Air pressure display | Pressure gage |
| Input Aire pressure | adjusted by rotary knob |
| Time adjustment | button |
| Operation mode | manual/Auto |
| Gluing accuracy | +/-0.01ml |
| Repeatability | >=800 times/S |
| Air pressure | AC 220V.50HZ |
| Air source | 0.4-0.8MPa |
| |
Version:0.9 StartHTML:0000000105 EndHTML:0000008109
StartFragment:0000000141 EndFragment:0000008069
Features.
1,Metal housing, more durable and not easy to break.
2,LCD screen display; higher precision
3,precision parts used.
4,vacuum back-draw function.
5,High precision back-draw valve, more stable.
6,More working mode: Auto mode, manual mode, and cycle mode are
available.
Notes
1. Power cable must be safe into ground wire.
2. Once the glue is added into the syringe, keep it upright,
otherwise the glue will run into the
machine inside.
3. No oil or wet moisture inside the air input!
4. You must turn slightly the back-draw valve; otherwise air bubble
runs into the glue.
5. When the glue inside the syringe exceeds 4/5 of the capacity,
please turn slightly the back-draw
valve, otherwise large glue quantity is sucked into the machine.
6. Never use chemical cleaner to wash the machine housing.
Eighth Installation:
1,Read carefully the user manual first.
2,Plug the glue dispensing converter into the joint of syringe.
3,Set the data wanted inside the machine.
4,Connect air.
5,Connect power
6,Open the switch
7,Install the needle
8,Add glue into the syringe.
9,Test machine and work.
