| Appearance and heat dissipation |
| Size | 74mm * 160mm * 122mm |
| Material | Aluminum Alloy |
| Cooling mode | No fan, silent |
| Mounting option | DIN Rail |
| Power supply and environment |
| Power input | DC12V/24V/48V |
| Power port | 5-pin Terminal Block, Redundant Power |
| Power consumption | less than 20W |
| Humidity | 5% ~ 95% without condensation |
| temperature grade | industrial grade, -40 ~ 85℃ |
| Protection level and availability |
| Protection level | EC/EN6100-4 industrial protection |
| MTBF | > 50000 hours |
| Connectors |
| Gigabit Ethernet Port | 8 x 10/100/1000Mbps |
| Gigabit Fiber Port | 4 x 1000BASE-X |
| 5G antennas | 2 |
| Console Port | 2 |
| Other | 1 x USB, 1 x SIM, 1 x Reset |
| operating system |
| Operating system | Linux |
| Online upgrade | support |
| management | Web-based network management |
| Switch protocols and functions |
| Remote access control | support |
| Standard protocols | IEEE802.3u, IEEE802.1p, IEEE802.1q and IEEE 802.3ad |
| Multicast | supports IGMP and IGMP Snooping multicast protocols. |
| VLAN | supports VLAN division. |
| QoS | supports QoS management. |
| Ports | Supports port aggregation, port rate limitation and broadcast storm
suppression. |
| IPv | supports IPv4 static routing settings |
| ACL | supports port MAC address binding |
| Ring network protection | supports |
| Port mirroring | supports |
| 5G Features |
| NR features | supports SA/NSA networks. |
| 4G/5G | automatic switching between different 4G/5G networks. |
| Modulation mode | uplink and downlink 256QAM |
| cryptographic algorithm | supports |
| 5G output power | N41: 23dBm±2dB N78: 23dBm+2dB/23dBm-3dB N79: 23dBm+2dB/23dBm-3dB |
| receiving sensitivity | N41: 2 antenna 10mhz/30khz SCS <-95.1dbm N78: 2 antenna 10mhz/30khz SCS <-96.1dbm N79: 2 antenna 40mhz/30khz SCS <-89.7dbm |
| LED |
| Function | LED | Status | Definition |
| Power | PWR1 | ON | PWR1 is connected and supplied normally. |
| OFF | PWR1 is not connected or the power supply is abnormal. |
| PWR2 | ON | PWR1 is connected and supplied normally. |
| OFF | PWR1 is not connected or the power supply is abnormal. |
| RUN | RUN | Flashing | system is operating normally. |
| ON/OFF | Abnormal system operation |
| Alarm | ALM | ON | Equipment alarm |
| OFF | Equipment without alarm |
| Gigabit Fiber Port | G9 ~G12 | ON | The port has established a valid network connection. |
| Flashing | The port has network activity. |
| OFF | The port has not established a valid network connection. |
| Each Ethernet RJ45 port has two indicators, the yellow indicator is
the port rate indicator and the green indicator is the connection
status indicator. |
| Ethernet Port | 1000M (Yellow) | ON | 1000M working state |
| OFF | 10M/100M working state |
| L/A | ON | The port has established a valid network connection. |
| Flashing | The port has network activity. |
| OFF | The port has not established a valid network connection. |
