Savantec 6.0-25.0 (mm) high-speed steel one pass Deburring with
replaceable edge
product description
The Deburr Master tool is Ultra Tool's most versatile holedeburring
and chamfering tool used by leading automobile makers all over the
work. Possessing the capability of deburring and chamfering the
front, back or both sides of your hole in a single pass.
Application
The Deburr Master can be used with most any spindle drilling
machines (single or multi), lathes, specialty machines, NC machine
or hand tools.
Blade Type/ Blade Replacement
The Deburr Master is made of a solid arbor piece for durability.
Its blades are easily interchangeable and are designed with an
open-end slot, eliminating the need to remove a pivot pin before
removing the blade allowing for easy replacement of blades. Simply
adjust the screw set in the shank end for desired chamfer depth
based on the RPM and hardness of the material being used.(Do not
compress spring to its solid condition. The blade will not retract
without any cushion in the spring.)
DISCARD DEBURRING TOOLS, The disposable deburring tool is designed
specifically for efficient and convenient removal of burrs on the
surface of workpieces in modern production environments. The
following is a detailed introduction about DISCARD DEBURRING TOOLS:
Definition and purpose:
DISCard Deburring TOOLS is a disposable or disposable deburring
tool used to quickly and accurately remove burrs from workpieces,
especially suitable for mass production and high-precision
machining needs.
characteristic:
Efficiency: DISCARD DEBURRING TOOLS can quickly remove burrs and
improve production efficiency.
Usability: These types of tools are usually designed to be simple,
easy to use, and reduce training time for operators.
Disposable: After use, it can be directly discarded without the
need for complex cleaning or maintenance, reducing production costs
and downtime.
High precision: Some advanced DISCARD DEBURRING TOOLS adopt
precision design, which can ensure the removal of burrs without
damaging the surface of the workpiece.
Type and specifications:
The types of DISCARD DEBURRING TOOLS are diverse, including tools
suitable for workpieces of different sizes and shapes.
In terms of specifications, these tools may cover processing needs
from small parts to large workpieces, and specific specifications
depend on actual applications.
Market application:
DISCard Deburring TOOLS are widely used in fields such as
mechanical manufacturing, automotive manufacturing, aerospace,
electronic manufacturing, etc., especially in situations where
high-precision and high-efficiency deburring is required.
Advantages:
Compared to traditional deburring methods, DISCARD DEBURRING TOOLS
has higher efficiency and lower cost.
Due to its disposable nature, it reduces the time and cost of
cleaning and maintenance.
For certain complex shapes or difficult to reach burrs, DISCARD
DEBURRING TOOLS can provide more flexible and effective solutions.
matters needing attention:
When using DISCARD DEBURRING TOOLS, attention should be paid to
selecting appropriate tool types and specifications to ensure
machining efficiency and workpiece quality.
Relevant safety regulations and operating procedures should be
followed during operation to ensure the safety of personnel and
equipment.
Development trend:
With the continuous development of the manufacturing industry, the
demand for deburring tools is also increasing. DISCard Deburring
TOOLS, as an efficient and convenient deburring solution, is
expected to be widely applied and developed in the future.
Technological innovation will drive the performance improvement and
cost reduction of DISCARD DEBURRING TOOLS, making it more in line
with market and customer needs.
product specification
product image
