Brief Introduction
Innovaster Water Spray process is an overpressure process, it's
different from Saturated Steam process in that air can be
introduced into the vessel during sterilization. Preheat Tank is an
OPTIONAL to preheat the process water while operator is entering
the process recipe for hot filling products. During process, water
is sprayed over the containers from different angles, steam can go
through the other loop of the heat exchanger to heat the process
water or directly injected into vessel.
Water Spray process can be used for various packages thermal
processing, excellent temperature distribution and efficient heat
transfer since Innovaster selects all top-class brands components
to provide the high-quality retorts and service to our customers
worldwide and because of our know-how. HMI controls provide a
user-friendly interface to retort control.
In a Water Spray process these steps are:
1.Prepare Tank (OPTIONAL – if an external preheat water tank is
used)
2.Come Up Fill (A Sterilization Step)
3.Come Up (A Sterilization Step)
3.Cook (A Sterilization Step)
4.Pressure Cool
5.Atmospheric Cool
6.Drain
Parameters
| Model | Dia(mm) | Effective L(mm) | Baskets | Volume (CBM) | Design Te.(Degree.C) | Design Pre. (MPA) | Test Pre.(Mpa) |
| Ws-0902 | 900 | 1800 | 2 | 1.32 | 147 | 0.35 | 0.44 |
| Ws-1003 | 1000 | 2400 | 3 | 2.12 | 147 | 0.35 | 0.44 |
| Ws-1203 | 1200 | 3000 | 3 | 3.78 | 147 | 0.35 | 0.44 |
| Ws-1204 | 1200 | 3600 | 4 | 4.45 | 147 | 0.35 | 0.44 |
| Ws-1205 | 1200 | 4500 | 5 | 5.48 | 147 | 0.35 | 0.44 |
| Ws-1403 | 1400 | 3000 | 3 | 8.2 | 147 | 0.35 | 0.44 |
| Ws-1404 | 1400 | 4000 | 4 | 6.77 | 147 | 0.35 | 0.44 |
| Ws-1405 | 1400 | 5000 | 5 | 8.31 | 147 | 0.35 | 0.44 |
| Ws-1406 | 1400 | 6000 | 6 | 9.85 | 147 | 0.35 | 0.44 |
| Ws-1604 | 1600 | 4500 | 4 | 9.95 | 147 | 0.35 | 0.44 |
| Ws-1605 | 1600 | 5700 | 5 | 12.36 | 147 | 0.35 | 0.44 |
| Ws-1606 | 1600 | 6800 | 6 | 14.57 | 147 | 0.35 | 0.44 |
