BP93420-IQT Pressure Transmitter
Introduction of flush Diaphragm pressure sensor:
The BP93420-IQT flat membrane pressure sensor utilizes an elastomer
made from imported materials, along with diaphragm isolation
technology. Importantly, the sensor head has no pressure sensing
holes, eliminating the risk of non-viscous medium blockage during
measurement. This integrated design makes the transmitter suitable
for pressure measurement and control applications involving viscous
media such as chemical coatings, paint, mud, asphalt, and crude
oil.
| Performance Parameters of flush Diaphragm pressure sensor: |
| Measurement Range | -100kPa…0kPa ~ 35kPa…3.5MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability | ≤0.1%FS |
| Hysteresis | ≤0.1%FS |
| Long-Term Stability | ±0.1%F.S/Year(Typical) ±0.2%F.S/Year(Maximum) |
| Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Frequency Response | 2.4Khz |
| Compensation Temperature | 0-70ºC(customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Protection Rating | IP65 |
| Weight | ~0.3kg |
Product Features of flush Diaphragm pressure sensor:
1. Wide measurement range,Various pressure interface options.
2. Diverse output signal options.
3. Adjustable zero and full-scale.
4. High accuracy,multiple sterile process connections.
Applications of flush Diaphragm pressure sensor:
1. Suitable for measuring non-corrosive gases and liquids with
316L.
2. Medical, biopharmaceutical, and food hygiene industries for
sterile processing.
3. Used in the paper and chemical industries, as well as for sewage
level and beverage can pressure measurements Suitable for hydraulic
and pneumatic control systems.
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0/1~10V |
| 0.5~4.5V | 5VDC |
| RS485 Communication Protocol | 3.6~30V / Battery | 4 wire |
1. Media Compatibility
When selecting a product, ensure the media under measurement is
compatible with the wetted components of the sensor. This
compatibility is crucial for the reliable and proper functioning of
the device.
2. Explosion-Proof Products
Please note that explosion-proof products do not include a digital
display as standard when placing an order. This is an important
factor to consider if a digital display is required for your
application.
3. Grounding and Lightning Protection
To guarantee the reliable operation of the product, we recommend
installing lightning protection devices on-site and ensuring the
proper grounding of both the product and power supply. This will
help safeguard the sensor against electrical disturbances,
maintaining consistent performance.
4. Cable Options
The product does not come with a default attached cable. If a cable
is needed, there are three material choices available:
polyethylene, PVC, and armored. Unless otherwise specified, the
polyethylene cable option will be used by default. If you require a
different cable material, please indicate this in your order form.
5. Special Requirements
For applications with special requirements, such as strong
vibration, instantaneous impact force, or intense
electromagnetic/radio frequency interference, please inform us and
provide the details in your order. This will allow us to verify the
product's suitability for your unique application needs.
| Order Guide of flush Diaphragm pressure sensor |
| BP93420XX | Pressure Transmitter |
| Code | Outline Construction |
| IB | General Pressure Transmitter | IX | Display Pressure Transmitter |
| IE | Shock-resistant Aviation Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter |
| IF | Moisture-proof Pressure Transmitter | IIE/IIIE | General/Display Pressure Transmitter |
| IN | Air Conditioning Dedicated Pressure Transmitter | | |
| IC | High-temperature Pressure Transmitter | | |
| IQ1/IQ2 | Large Diaphragm /High-temperature Pressure Transmitter | | |
| Measurement Range | -100kPa…0kPa ~ 35kPa…3.5MPa |
| (0-X)Kpa or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | 2088 Industrial Casing |
| B5 | 2088 Industrial Casing with Display |
| B6 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
FAQ:
Q&A
Q1:Areyou manufactrade company?
A1:We are manufactrader with more than 29 years of experience.
Q2:Customized Product
A2:We provide OEM and Custom-Design services.
Q3:Quality Quarantee
A3:Our products have a limited 12 to 18 months warranty from
shipment date to the original purchaser.Hengtong will replace or
repair defective products free of charge.This warranty does not
apply to any units have been modified,misused,neglected.
Q4:Shipment&packing
A4:Products are generally shipped by international Express
including UPS,FedEx,DHL and INT for freight prepaid,also can use
your shipment account to collect,Standard export packing,including
inspection certification.
Q5:Contact US
A5:We have an active and experienced sales team to serve you on
technical question and business issue.Just leave us message or
click the Online Service.
