BPHT24 Flush Diaphragm Pressure Sensor
Introduction of flush diaphragm pressure sensor transmitter:
BPHT24 flush diaphragm pressure sensor transmitter Measurement
principle and performance features: The flat diaphragm pressure
transmitter comprises a strain gauge and diffused silicon front
end. The strain gauge flat diaphragm measuring end adopts a
specially treated strong flushing diaphragm. Hard particles in the
measured medium will not damage the isolated flushing diaphragm. It
has a compact structure, corrosion resistance, vibration
resistance, particle impact resistance, and wide range of
temperature compensation.
Product Features of flush diaphragm pressure sensor transmitter:
1. Various pressure interface options.
2. Designed for hygienic applications to prevent medium scaling.
3. High accuracy with a fully stainless steel structure.
4. Easy to clean.
Applications of flush diaphragm pressure sensor transmitter:
1. Suitable for measuring non-corrosive gases and liquids with
316L.
2. Ideal for environmental protection and chemical industries.
3. Used in the marine and aviation industries.
4. Well-suited for use in the medical, biopharmaceutical, and food
hygiene industries.
| Performance Parameters of flush diaphragm pressure sensor transmiter |
| Measurement Range | 0~35Kpa…~20MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability& Hysteresis | 0.02%F.S(Typ.) 0.05%F.S(Max.) |
| Long-Term Stability | ±0.1%F.S/Year(Typ.) ±0.2%F.S/Year(Max.) |
| Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Frequency Response | 2.4Khz |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Protection Rating | IP65 |
| Weight | ~0.25kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0/1~10V |
| 0.5~4.5V | 5VDC |
| RS485 Communication Protocol | 3.6~30V / Battery | 4 wire |
1. When selecting a product, please ensure that the medium under
test is compatible with the contact part of the product.
2. When placing an order, please note that explosion-proof products
do not include a digital display.
3. When ordering a transmitter with an LCD or LED display head, the
power supply of the transmitter should not be lower than 20VDC.
4. In order to ensure the reliable operation of the product, it is
recommended that users install lightning protection devices on the
site and ensure that the product and the power supply are reliably
grounded.
5.The cable does not come with default cable attached. If you
require cable, there are three materials to choose from. If no
specific instructions are given, polyethylene cable materials will
be used by default.If different cable materials are required,
please indicate in your order form.
6.In case of special requirements such as strong vibration,
instantaneous impact,strong electromagnetic or radio frequency
interference ,please inform us and indicate in your order.
| Order Guide of flush diaphragm pressure sensor transmitter |
| BPHT24 | Pressure Transmitter |
| Code | Outline Construction |
| IX | Display Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter |
| T | High-temperature resistant Pressure Transmitter | | |
| Measurement Range | 0~35Kpa…~20MPa |
| (0-X)Kpa or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | 2088 Industrial Casing |
| B5 | 2088 Industrial Casing with Display |
| B6 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
FAQ:
Q1:Are you manufactrade company?
A1:We are manufactrader with more than 29 years of experience.
Q2:Customized Product
A2:We provide OEM and Custom-Design services.
Q3:Quality Quarantee
A3:Our products have a limited 12 to 18 months warranty from
shipment date to the original purchaser.Hengtong will replace or
repair defective products free of charge.This warranty does not
apply to any units have been modified,misused,neglected.
Q4:Shipment&packing
A4:Products are generally shipped by international Express
including UPS,FedEx,DHL and INT for freight prepaid,also can use
your shipment account to collect,Standard export packing,including
inspection certification.
Q5:Contact US
A5:We have an active and experienced sales team to serve you on
technical question and business issue.Just leave us message or
click the Online Service.
