Embedded Monitoring Platform Nurse In Small And Medium-Sized
Computer Rooms
Parameter list
Figure 1-1 Onboard Parameter
| CPU platform | ARMCortex-A35 |
| Internal Storage Capacity(DDR) | 512M RAM |
| FLASH storage | 16G EMMC |
| Operating System | Linux |
Figure 1-2 Port Parameter
Power INPUT (Optional) | - Single Power Supply VAC220/240; VDC336
- DC 48V
|
| 4 DO ports | Standard DO output normally on NC signal |
| 9 DI ports | Provides 8 universal DI inputs (dry or wet) for connecting to smoke
sensors, door status sensors, and infrared sensors; 1 dedicated DI
input (access to water pad) |
8-channel 485 serial port
| Support RS485 communication mode,baud rate is 1200bps, 2400bps,
4800bps, 9600bps, 19200bps optional. Word length 5-8 bits; The
verification mode can be None, Odd, Even, Mark, or Space. The stop
bit is 1 or 2 bits. |
| 1 USB port | 1 Type A USB port, 2.0 standard (full speed: 12Mbits/s); Access to
USB camera images, support for standard USB flash drives and
keyboard and mouse |
| 1 debugging port | USB type-C |
| LAN1Port | 10/100M,half/full-duplex Adaptive, with network cable automatic
crossover function |
- Intelligent monitoring and acquisition unit, 1U height, Linux
system, built-in monitoring software, can access UPS, air
conditioning, distribution cabinet, temperature and humidity,
water, smoke and other comprehensive power environment equipment;
- Software for B/S architecture, web remote access;
- The system provides standard SNMP, MODBUS RTU/TCP, and B interfaces
for the integration of upper-layer monitoring systems or
third-party systems.
Environment Monitoring System Product Feature
FSU1000 is a hardware acquisition device for the hardware control
and service of the cabinet and machine room station. The new design
combines the practical needs of the project delivery and project
implementation of the outdoor station ETC and the outdoor cabinet,
focusing on the solution of the system maintainability, system
wiring, debugging, aesthetics and other requirements, suitable for
most of the front-end collection of the application environment.
FSU1000 series power environment monitoring unit is a miniaturized,
high reliability and convenient installation power environment
monitoring system for Communication Base Station, integrated
computer room and outdoor cabinet, it is specially used for power,
environment, equipment control and remote monitoring of
Communication Base Station,integrated machine room and outdoor
machine cabinet.
The FSU1000 series dynamic environment monitoring unit has the
functions of detecting the dry contact signals such as entrance
guard, water immersion, smoke,lightning protection, air
conditioning failure, infrared, temperature and humidity detection,
etc. and built-in city power cut detection and tilt vibration
detection functions.
FSU1000 series Dynamic Environmental Monitoring Unit built-in DC
voltage measurement function, and equipped with 8 Hall Effect
Sensor Interface, used to measure DC current, analog measurement
voltage, current transmitter.
FSU1000 Series Dynamic Environment Monitoring Unit has
multi-channel RS485/RS232 signal (up to 16) access function, can Be
used for switching power supply, air conditioning, UPS, lithium
batteries, smart meters, electronic door locks, voice, video
equipment protocol access.
FSU1000 series Dynamic Environmental Monitoring Unit with a variety
of communication mode selection (RS485/RS232, TCP, UDP, SNMP,
NB-IOT, 4g, Wifi, etc.) , easy to network. FSU1000 series dynamic
environment monitoring unit supports access to 7-inch configuration
display.
Figure 1-3 Envirenmental Parameter
| Item | Parameter |
| Working site | Indoor |
| Working temperature | 0℃～＋50℃ |
| Relative humidity | 20％～85％, non-condensing |
| Barometric pressure | 70kPa～106kPa |
| Storage Temperature | －40℃～＋70℃ |
| Cooling | Natural cooling |
| Weight | 2.0KG |
| Orthers | The dust meets the indoor standards of GR-63. No corrosive gas,
flammable gas, oil mist, water vapor, dripping or salt, etc |
Figure 1-4 Protection Standard Parameter
| Item | Standard |
| Electrostatic protection | EN61000-4-2,3 grade, Contact/air discharge;6KV/8KV |
| Surge resistance | EN61000-4-5,3grade, 4KV/2KV@8/20us&2Ω |
Figure 1-5 Lightning Protection Parameter
| Test port | IO port | Serial port, Ethernet port | Power port |
| Impulse current 8/20us, positive and negative 5 times each | Differential-mode 5kA | Differential-mode 5kA | Differential-mode 5kA |
| Common mode 5kA | Common mode 5kA | Common mode 5kA |
Figure 1-6 Packaging Parameters
| Item | Parameter |
| Packaging size | L440mm*W200mm*H44mm |
| Packing list | Main machine *1 Mounting screws and hanging ears *1 User manual *1 Test report *1 Power cord *1 Certificate *1 Plastic bag and foam *1 |
Product pictures:
