Large Special Tunnel Kiln Equipment Fully Automated Temperature
Adjustable
Product Introduction
Tunnel kiln is a modern continuous firing thermal equipment similar
to a tunnel, which is built with refractory materials, insulation
materials, and building materials and is equipped with kiln trucks
and other transportation vehicles. It mainly consists of kiln body,
conveying equipment inside the kiln, fuel combustion system, and
ventilation equipment. Widely used in the roasting production of
ceramic products, it is also applied in the metallurgical industry
such as abrasives.
Product Advantages
1. Continuous production, short cycle, high output, and high
quality.
2. Working on the principle of countercurrent, it has a high heat
utilization rate and fuel economy. Due to the good retention of
heat and utilization of waste heat, fuel is very economical.
3. The firing time is shortened. Compared to ordinary large kilns,
it takes 3-5 days from loading to emptying, while tunnel kilns can
be completed in about 20 hours.
4. Beautiful and elegant, easy to operate, intelligent operation,
and labor-saving. Not only is it easy to operate during firing, but
the loading and unloading operations are also carried out outside
the kiln, which is very convenient, improving the working
conditions of operators and reducing labor intensity.
5. Strict material selection, safe and durable, accurate
temperature control, and stable performance. The temperature of the
pre heating zone, firing zone, and cooling zone is often maintained
within a certain range, making it easy to grasp their firing
patterns, resulting in better quality and less damage rate.
6. The kiln and kiln furniture are both very durable. Because the
kiln is not affected by rapid cooling and heating, the kiln body
has a long service life and is usually repaired only once every 5-7
years.
Applicable Scope
The product is widely used in mineral drying, pyrolysis, crushing,
roasting, calcination, sintering, etc; Carbon reduction of metal
oxide ores, desulfurization of metal sulfide ores, etc; Dry firing
of refractory materials and engineering ceramics; Drying and
sintering of daily ceramics, architectural and sanitary ceramics;
Drying and calcination of molecular sieve catalytic materials and
chemical raw materials; Drying, synthesis, and sintering of
electronic ceramics. Moreover, research and small-scale production
in enterprises and institutions, as well as in the fields of
ceramics, metallurgy, electronics, glass, chemical engineering,
machinery, refractory materials, new material development, special
materials, and building materials involved in scientific research
and teaching in universities, will also be used.
We prioritize quality based on integrity and reasonable pricing.
Our machines are manufactured strictly in accordance with national
and international standards, and we conduct testing on each device
before delivery. We will make every effort to meet the needs of our
customers and provide efficient and high-quality tunnel kilns. We
pursue small profits and high sales, and we can offer you a lower
price than other trading companies. If the product is really
suitable and can benefit you, the price can be negotiated. Please
call or contact us through other means for further discussion.
Parameter Table
| Model | Capacity (pcs/hr) | Forming Moisture | Vacuum Degree(mpa) | Power(kw) |
| TTT57-33-21 | 14000-17000 | 17%-19% | ≤-0.092 | 160+55 |
| TTT57-33-22 | 10000-15000 | 17%-19% | ≤-0.092 | 132+55 |
| TTT57-33-23 | 8000-12000 | 17%-19% | ≤-0.092 | 110+45 |
| TTT57-33-24 | 6000-8000 | 17%-19% | ≤-0.092 | 75+37 |
| Note: The above parameters are for reference only, please refer to
the actual product for details. |
