Hard Rebar Gantry Shearing Machine Iron Gantry Shear Hydraulic
Introduction of gantry shears:
TONTEN machinery gantry shears are mainly composed of gantry,
shearing mechanism, transmission system and electrical control
system. They are widely used in the fields of scrap steel and scrap
metal recycling, metal smelting, building demolition, etc. The
waste is actively sent to the cutting edge by the conveyor belt.
The feeding speed can be adjusted by the speed regulating motor.
Side kneading cylinders are installed on both sides of the material
box. The motor drives the hydraulic oil pump to work, generating
high-pressure oil, which is then transported to the hydraulic
cylinder through the oil pipe to push the shear knife to perform
the shearing operation.
Advantage:
1. The gantry shearing machine has manual, automatic and remote
control functions. The operation and control are convenient and
simple. The scissors can start and stop shearing at any position
during the working process, and the size of the shearing mouth can
be arbitrarily controlled according to the size of the sheared
material. PLC manual and automatic control box. It can realize
manual and automatic installation, with remote control operation,
and realize remote start, stop and automatic operation.
2. It adopts hydraulic drive,simple operation, high working
pressure, strong punching force, and can complete the task of
blanking at one time; hydraulic and electrical integrated control,
easy to realize overload protection.
Gantry shearing specification:
Customer site:
