Gantry Shear Machine Hydraulic Scrap Metal Shear Cutting Guillotine
Product introduction
TONTEN machinery gantry shears are mechanical equipment used to cut
and shear thick metal plates. They are mainly used for assembly
line operations of thick plates such as steel billets and steel
plates. The body structure of the gantry shear is similar to that
of a gantry crane, consisting of a gantry frame, a scissor body, an
electrical system, and a transmission system. It adopts a
cantilever structure or a closed structure. The large hydraulic
gantry shear is a high-precision metal material cutting equipment,
mainly composed of a mechanical part and an electrical control
system.
Gantry shears are scrap metal shearing equipment. The equipment
hopper automatically pushes the material, and the automatic
shearing has high production efficiency, is easy to operate, has
high shearing efficiency, and has a wide range of shearing
materials. The operator controls the operation of the entire
machine through remote control.Gantry shears machine is a crushing
device for recycling scrap iron and scrap metal.
Advantages:
1. Hydraulic gantry shear adopts hydraulic-electric integrated
control, which can realize single and automatic work conversion,
and can start and stop at any working position. It is easy to
realize overload protection.
1. TONTEN machinery gantry shear machine is equipped with a large
air volume air cooler to effectively control the hydraulic oil
temperature. At the same time, the air cooler solves the problem of
large footprint and inconvenient water source of the water cooler
2. When the material of the push chute with pressure cover is too
loose, the waste material can be squeezed and reduced by the side
extrusion cylinder, and then sent to the shearing blade through the
conveyor table for cutting
3. The hydraulic gantry shear machine adopts hydraulic
transmission. Compared with the mechanical transmission shearing
machine, it has the characteristics of small inertia, low noise,
stable movement, flexible operation, and large shearing section.
4. The slideways on both sides of the knife frame are lubricated
with white oil, and the slideway material is made of high-radium
steel wear-resistant material, which is durable.
5. Hydraulic gantry shearing machine has compact structure, the
fuselage is welded with steel plates, and the mechanical
performance is stable. The gantry shear adds a front plate guide
device to improve the stress condition of the whole machine.
Adopting electro-hydraulic control, it can realize inching and
linked automatic circulation.
Gantry shear parameters:
Rated Powe | 45x3kw |
Cutting Frequency | 3-4times/min |
Max cutting force | 250T |
Production rate | 12-15t |
Color | Customized |
Cutting material | Metal Stainless Steel Carbon Steel |
