0.06-0.1mm Thick High Adhesive PVC Hologram Coated Overlay
Laserable For Smart Card Production
(Hologram overlay for PVC card, Star Shaped Laser Film, PVC Laser
Film, Snowflake shape laminating film, Laser hologram PVC film)
1. Introduction of 0.06-0.1mm Thick High Adhesive PVC Hologram
Coated Overlay Laserable For Smart Card Production
It is also known as laminating film, the main ingredient is
polyvinyl chloride, it is on the surface of PVC film coated with a
layer of thermosol, so that it and PVC card printing sheet or basic
PVC material has a good adhesion effect. The main function of the
tape film is to cover the upper and lower layers of the PVC card.
After the heating and pressure of the laminating machine, the PVC
card can form a very bright and clean surface, and can play a very
good protective effect on the printing content, effectively prevent
the card surface from being scraped and scratched.
2. Characters of 0.06-0.1mm Thick High Adhesive PVC Hologram Coated
Overlay Laserable For Smart Card Production
PVC laser aluminized film: mainly used in screen printing, offset
printing, gravure printing and other packaging products.
It is suitable for high-end membership CARDS, VIP CARDS, platinum
CARDS, diamond CARDS and can be made into IC CARDS, ID CARDS
according to the requirements.
| Material: | PVC | Color: | Transparent |
| Thickness: | 0.06mm 0.08mm,0.1mm | Size: | A4. A3 or customerized |
| Gloss 60°% | ≤50 | Density (g/cm³) | 1.25±0.05 |
| Roughness (Ra um) | 0.7-1.3 | Roughness (RZD um) | 4-7 |
| Tensile Strength | vertical Mpa:≥50 | Tensile Strength | horizontal Mpa:≥44 |
| Vicat softening point ℃ | ≥72±2 | Heat shrinkage | ≤45 |
3. Application of 0.06-0.1mm Thick High Adhesive PVC Hologram
Coated Overlay Laserable For Smart Card Production
It is suitable for high-end membership CARDS, VIP CARDS, platinum
CARDS, diamond CARDS and can be made into IC CARDS, ID CARDS
according to the requirements.
4. Parameters of 0.06-0.1mm Thick High Adhesive PVC Hologram Coated
Overlay Laserable For Smart Card Production
Material: PVC
Color :Transparent
Thickness:0.06mm 0.08mm,0.1mm
Width:210mm or custom
Length:297mm or custom
Surface: smooth
Gloss 60°%:≤50
Roughness (Ra um):0.7-1.3
Roughness (RZD um):4-7
Density (g/cm³):1.25±0.05
Black spots: Particle size above 0.5mm is not allowed
Impurities: Particle size 0.3-0.5mm no more than 20
Tensile Strength vertical Mpa:≥50
Tensile Strength horizontal Mpa:≥44
Vicat softening point ℃:≥72±2
Heat shrinkage:≤45
Specification:210*297mm( special size can be customized)
Thickness in mm: kinds of thickness like normal Pvc overlay , such
as 0.06,0.08,0.1mm
