KEYILASER Automatic 6 Axis Robot Arm Laser Welding Machine 1500w
2000w Laser Welder For Galvanized Sheet Corner Welding
Industrial welding manipulator application and benefits:
Robot arm laser welding equipment is widely used due to its
efficiency and precision. It is widely used in industries such as
automotive, aerospace, and electronics because of its ability to
produce high-quality welds. Its advantages include higher
manufacturing speed, reduced material deformation, and less manual
labor.
Industrial spot welding manipulator application and benefits:
The spot welding rate of manipulators in the welding industry is
quite low. Spot welding just requires point position control, hence
the industrial manipulator should be employed for spot welding as
soon as possible. Spot welding reduces the need to move welding
tongs in specific directions between spots.To reduce shift times
and boost output, a spot welding industrial manipulator must be
able to not only hold a big load but also shift between places
fast, smoothly, and precisely.
The position of the fixture and welding gun cannot be modified as
the parts are changed, despite the fact that a typical spot welding
machine can reduce labor intensity while generating higher-quality
welds in environments with fewer fluctuations and higher production
volumes.Furthermore, the industrial spot welding manipulator is
ideal for small batch, multi-varietal manufacturing since it can be
reprogrammed to change the space point position to meet the needs
of different parts.
| Welding speed | 0-120mm/s |
| Fiber length | 5m-10m |
| Beam quality | M2<1.1 |
| Focal Spot Diameter | 0.3mm |
| Pulse Width | 0.1-20ms |
| Single-pulse energy | 120J |
Industrial arc welding manipulator application and benefits:
Arc welding is much more advanced than spot welding. Precision
control is required for the tool center point (TCP), which
comprises welding parameters, torch orientation, and wire end
trajectory.
Because of the complicated spatial curvature of arc welding, human
labor is required.Industrial manipulators with continuous
trajectory control are ideal for this type of operation, therefore
they are commonly used to weld complex structures and tanks.
