Applicable scope:.
Mainly used for the determination of thermal deformation and Vicat
softening point temperature of polymer materials (such as plastics,
rubber, nylon, electrical insulation materials, etc.). Applicable
to universities and colleges, research institutions, and product
quality supervision and inspection units.
Compliant with standards:
Complies with the requirements of GB/T 8802-2001, ISO 2570 rigid
polyethylene (PVC), GB/T 1633, GB/T 1634, ISO 75-1987 (E), ISO
306-1987 (E) and other standards.
Compliant with standards:
GB/T 1633-2000 (idt ISO 306:1994) Determination of Vicat Softening
Temperature (VST)
GB/T 1634.1-2004 (idt ISO75-2:2003) Plastics Determination of Load
Deformation Temperature (General Test Method)
GB/T 1634.2-2004 Plastics Determination of Load Deformation
Temperature (Plastics, Hard Rubber, and Long Fiber Reinforced
Composite Materials)
GB/T 1634.3-2004 Plastics Determination of Load Deformation
Temperature (High Strength Thermosetting Laminated Materials)
GB/T 8802-2001 (eqv ISO 2507:1995) Thermoplastic pipes and fittings
- Determination of Vicat softening temperature
Main performance indicators:
Test range: room temperature~300 ℃
Number of sample racks: 2, 3, and 6;
Heater power: 4KW;
Vicat Disturbance: 1mm.
Deformation resolution error: 0.005mm
Heating rate: A=5℃/6min B=12℃/6min;
Maximum temperature measurement error: ± 0.5 ℃
Maximum temperature control error: ± 12 ℃/6 minutes (hot
deformation test) ± 5 ℃/6 minutes (Vicat test)
Weight of weights(i.e. load rod, standard indenter, Sensor probe,
tray, screw): 68g±1g
Heating medium: silicone oil (below 200 millimeters, flash point
above 300 ℃)
Cooling method: natural cooling or water cooling (C-type machine)
External dimensions: 520×four hundred and twenty×1100mm;
Main power supply: 220V+10%, 15A, 50HZ;
A set of experimental application software for the Chinese version
of the operating system of the thermal deformation and Vicat
softening point temperature tester
