Unpowered translation vehicle + ground conveyor chain.
Purpose:
Used for surface treatment of large, heavy workpieces with low
productivity
requirements;
Process flow:
pieces on-->sanding-->cleaning-->drying-->spray
painting-->baking paint-->pieces off;
The room structure includes: polishing room, cleaning room, drying
room, spray painting room, and baking room (customized according to
the product);
Translation car: It is welded and formed by I-beam and channel
steel, and the surface is paved with 8mm thick steel plate;
Ground conveyor chain equipment description:
It is mainly composed of driving device, traction chain, tensioning
device and conveyor
track.
⑴Driving device
The power of the driving device is transmitted to the driving
spindle through the motor-reducer and the transmission chain.
Finally, the driving sprocket drives the conveyor
chain, making the conveyor chain move forward along the conveyor
chain track; the use of a cycloidal pinwheel reducer can greatly
improve the transmission efficiency. , and
the movement is reliable.
⑵ Traction chain
The chain consists of pin shaft, chain plate, pusher chain plate
and roller sleeve. The
pusher spacing can be assembled into various shapes according to
needs.
just to meet the needs of work rhythm.
This series of conveyor chains all use high-quality manganese steel
as chain plates, and all require specified tensile tests before
leaving the factory.
⑶Tensioning device
This device ensures that the entire conveyor chain always maintains
a relatively stable
tension during operation. At the same time, it can absorb or
compensate for the
installation error of the conveyor chain, the expansion and
contraction caused by thermal expansion, contraction and force
deformation during operation. Ensure that the conveyor chain has an
initial tension at the winding-out point of the drive device and
eliminate devices that generate negative tension in the entire
line.
This series of tensioning devices mainly uses screw rods for
tensioning. Its structure is
relatively simple and compact, and its tensioning force is
relatively stable;
⑷Conveyor track
The trolley track adopts 30kg/m light rail (the foundation is
pre-embedded in
construction), the running wheels use light rail steel wheels, and
the trolley brackets are all welded from section steel, with a
solid structure;
The entire line adopts PLC control, stepless speed adjustment, and
is equipped with
multiple induction probes and control buttons.
