24 Cores Mini FTTH Dome Fiber Optic Splice Closure 1 Oval 3 Round
Ports Heatshrink Seal
This FTTH fiber optical mini dome ftth aerial cheap closures can be
placed in aerial, underground, wall-mounting, hand hole mounting
and duct-mounting applications.
Optical splice closures are used to distribute, splice, and store
the outdoor optical cables which enter and exit from the ends of
the closure. There are two connection ways: direct connection and
splitting connection. They are applicable to situations such as
overhead, man-well of pipeline, embedded situation etc. Comparing
with terminal box, the closure requires much stricter requirement
of seal. Sealing ring and
air valve are required for closure, but that are not necessary for
terminal box.
Features
- Small size, large capacity and convenient maintenance.
- The enclosure casing is made of quality engineering plastics, good
performance of anti-erosion against acid and alkali salt,
anti-aging, as well as smooth appearance and reliable mechanical
structure.
- Each optical cable and fiber can be operated individually.
- Elastic integrated seal ensure tightening fit
- Aerial, underground, wall mount, pole mount,manhole is available
- Innovative insert plates and fixing bolts, used to fix and seal
FOSC, simple installation.
- Better performance for protecting fiber cable splices in
straight-through an branching.
- The air valve is provided for the closre and used to check the
sealing performance.
Specification
| Model | GJS-2030 |
| Dimension(D*H)mm | D100*H330 |
| Max capacity | 24 cores, each tray 12 fibers |
| Cable ports | 1 oval 3round ports |
| Cable diameter | oval ports dia. 30mm, round port: 21mm |
| Material | PP |
| Temperature range | - 400C ～ + 650C |
| Relative humidity | ≤95%(40°C) |
| Atmospheric pressure | 70kpa-106kpa |
| Connector loss (insert, repeat) | ≤0.5db |
| Mechanical Durability Test | ≥1000 times |
| Warranty time | 20years |
Product details
This mini splice closure is slim type, diamter only 100mm, good
choice for pole mounted outdoor application, low cost but large
capactiy.
Every splicing closure will configurate with heat shrink seal
tubes, insolation tape, sand paper, bufrer tube, sleeves, alcohol
bag, nylon tie, etc.
Standard mounting kits is wall mount(metal sheet with 1 strap and
mounting hole itself), if need pole mount will add one more pole
mount strap.
This mini closure can be aerial mounted too, there is 2holes on
enclosure body itself, and logo print location, the clamp is
special design and lock by hand. Also the hole body have many
strength strips to make it suitable for outdoor application.
The optical fiber closure is mini dome type, 1oval 3round ports for
most application. The diameter is very large, oval port is 30*50mm,
round port can do maximum 21mm. All ports with heat shrink tubes
when delivery.
There are total 2pcs splice trays for fusion splicing, each tray
can hold maximum 12cores optical fibers, total 24cores.Tray
material is ABS, white color. Reasonable bend radius, and large
fiber routing area and storage space. And the splice trays are fix
on the box with screws in middle.
The internal with cable clamps, and metal kits to hold the cable
kits like strength member outer sheath, FRP, metal, aramid yarn,
etc.
This 24cores splice closure is with white rubber seal around the
bottom to ensure it IP68 waterproof function.
The mounting kits is 1metal sheet with stainless steel tapes around
the body, if need pople mount, can add one more tape, see below
picture:
Optical splice closure will be packed by individual carton box,
with accessories and plastic bag, then in master carton box for
shipment. Good protection during long term transporation by sea or
by air.
Frequent buy together:
1.5mm Steel EVA Heat Shrinkable Tube Production Sleeve 45mm 40mm
60mm
https://www.fibreopticbox.com/sale-3989424-1-5mm-steel-eva-heat-shrinkable-tube-protection-sleeve-45mm-40mm-60mm.html
