6-Port Gigabit Ruggedized 24V Ethernet Switch
Introduction to 6-Port Ethernet Switch
IM-FS240GE series is the 10/100/1000 Mbps industrial fiber switch,
operating temperature -40 ℃ to + 75 ℃, support wide voltage dual
power input, meet IP40 protection degree and EMC industrial grade
requirements, DIN rail installation, pass through dangerous
environmental certification and comply with FCC and CE standards.
The reliable industrial grade design could ensure continuous and
stable operation of the automation system.
Technical Information of Gigabit Industrial Switch
| Product Name | 10/100/1000Mbps Industrial Fiber Switch(2F+4TP) |
| Model No. | IM-FS240GE |
| Port | 2x100/1000M SFP Fiber SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500-meter 4x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) 1x6-PIN Power Terminal Block |
| Protocol | IEEE 802.3(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ab(1000Base-TX) |
| Switching Features | Transmission mode: storage and forward Forwarding delay: <10us System bandwidth: 12Gbps (non-traffic jam) Forwarding rate: 17.856Mmps MAC: 4K Packet buffer size: 1.75Mb |
| Network Media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
| LEDs | Power, Fiber, Network, PoE PWR: Power
Fiber: FX1, FX2 On: transmission is normal Off: transmission is NOT normal(faulty optical module or
disconnected)
Copper orange: PoE indicator On: PoE is working Off: PoE is not working or this is Non-PoE device
Copper green: Speed indicator On: transmission speed is 1000Mbps Blinking: in transmission Off: Disconnected or working speed is 10/100Mbps |
| Power Supply | Redundant DC12V~DC52V input, typically DC12V/DC24V/DC48V Reverse connection: support |
| Environment | Working temperature: -40°C～75°C Storage temperature: -40°C～85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
| Industry Standards | ESD: IEC61000-4-2, ±15KV air, ±6KV contact EFT: IEC61000-4-4, General ±6KV Surge: IEC61000-4-5, Differential ±2KV, Common±6KV |
| Certification | CE-EMC: EN 55032:2015+AC: 2016+A1:2020+A11: 2020 EN 55035:2017+A11: 2020/EN IEC 61000-3-2:2019/A1: 2021 EN 61000-3-3: 2013/A2: 2021/AC:2022 CE-LVD: EN IEC 62368-1: 2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B(Class B) ANSI C63.4: 2014 |
| Mechanical information | Shell: Corrugated metal shell, IP40 grade level Dimension: 114*93*35mm Mounting method: Din-rail/Wall mounting Weight: 0.35Kg/0.45Kg(Net/Gross) |
| Warranty | 3 years, lifetime technical support |
Dimension of 24V LAN Switch
Accessories
| Industrial Optical Module |
| OSPL1E06D-85 | 100BASE-FX(850nm) |
| OSPL1E06D | 100BASE-FX |
| OSPL1E20D | 100BASE-LX |
| OSPL1E40D | 100BASE-EX |
| OSBL1E20D-35 | 100BASE-BX-U(TX 1310 RX1550) |
| OSBL1E20D-53 | 100BASE-BX-D(TX 1550 RX1310) |
| OSPL1G05D | 1000BASE-SX |
| OSPL1G06D | 1000BASE-SX(1310nm) |
| OSPL1G20D | 1000BASE-LX |
| OSPL1G40D | 1000BASE-EX |
| OSBL1G20D-35 | 1000BASE-BX-U(TX 1310 RX1550) |
| OSBL1G20D-53 | 1000BASE-BX-D(TX 1550 RX1310) |
| Industrial DIN Power Supply |
| IM-DAC220/DC48V2.5A | AC220V to DC48V2.5A, -40～70℃ |
| IM-DAC220/DC48V5A | AC220V to DC48V5A, -40～70℃ |
| IM-DAC220/DC48V10A | AC220V to DC48V10A, -40～70℃ |
OEM of Olycom Ethernet Switch
- OEM and ODM service are optional.
- OLYCOM can provide product with customer LOGO and will do our best
to meet clients requirements.
- It is OK to put your logo&model on the device or product label.
FAQ of Industrial Network Switch
1. who are we?
We are based in Guangdong, China, start from 2005, sell to Western
Europe(15.00%), Eastern Europe(15.00%), Southern Europe(10.00%),
South America(10.00%), Africa(10.00%), Southeast Asia(10.00%),
North America(10.00%),Northern Europe(5.00%), Mid East(5.00%),
Oceania(5.00%), Eastern Asia(5.00%). There are a total of about
101-200 people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production.
Always final Inspection before shipment.
3. What can you buy from us?
Industrial Fiber Switch, HDMI/DVI/SDI Video Optical Converter, POE
Fiber Switch, Fiber Media Converter, SFP Transceiver
4. Why should you buy from us not from other suppliers?
Shenzhen Olycom Technology Co., Ltd. is a manufacturer of fiber
optic products since 2003. We have passed the HIGH-TECH and
ISO9001. There is many domestic and abroad agents that help us to
have a good market share.
5. What services can we provide?
Accepted Delivery Terms: FOB, CIF, EXW；
Accepted Payment Currency: USD, EUR, JPY, CAD, HKD, GBP, CNY, CHF;
Accepted Payment Type: T/T, PayPal, Western Union;
Language Spoken: English, Chinese, Spanish, Russian
