MF11 NTC Thermistor 100k Ohm 104J / K /M 6.5x4mm Thermal resistor for temperature compensation
MF11 Temperature Compensated NTC Thermistor.pdf
MF11 compensated thermistor
NTC (negative temperature coefficient) thermistor is a heat-sensitive semiconductor resistor whose resistance value decreases with the increase of temperature, and the resistance temperature coefficient is in the range of -2%/k~-6%/k, about 10 times that of the metal resistance temperature coefficient. The change in the resistance value of the NTC thermistor can be caused by the change in the external ambient temperature, or it can be caused by the flow of current and its own heating. Its various uses are based on this property. NTC thermistors are composed of polycrystalline ceramics with mixed oxides. The conductive mechanism of this material is quite complex.
Dongguan Linkun electronic Technology Co., LTD is the domestic earlier production NTC thermistor professional manufacturers, the company produces the NTC thermistor is widely used in all kinds of handheld devices and miniaturization of electronic devices, are widely used in all kinds of temperature measurement and temperature compensation, the company production of NTC thermistor with low price, good quality, It can completely replace foreign brands such as Murata, TDK and EPCOS. 1. The scope of application: used for temperature measurement and general accuracy in measuring equipment, temperature compensation of transistor circuit. 2. Characteristics: MF11: B value error range is small, the resistance error range in 5% of the products, its consistency, good interchangeability. MF12: a wide range of impedance values maximum nominal resistance up to 2 m, stability is good.
- The scope of application:
used for temperature measurement and general accuracy in measuring equipment, temperature compensation of transistor circuit.
MF11: B value error range is small, the resistance error range in 5% of the products, its consistency, good interchangeability.
MF12: a wide range of impedance values maximum nominal resistance up to 2 m, stability is good.
Appearance structure and size:
Main technical parameters:
Time constant ≤ 30 s
Measuring power ≤0.1 Mw
Use temperature range – 55 to ~ + 125 ℃
B value and allowable deviations are shown in the table below
Dissipation coefficient 6 mW / ℃
Rated power 0.5 W
Product number:
| Type | 25℃ when rated zero-power resistanc | B (value) |
| resistance (Ω) | allowable deviation range (%) | (25/50 ℃) nominal value (K) | Allow deviation (%) |
| MF11 | 3.3～33
6.8～68
15～150
33～330
68～680
150～1500
330～3300
680～6800
1500～15000
3300～33000 6800～68000
15000～150000
33000～330000
68000～680000
150000～5000000 | ±5 ±10
±20
| 2700
2830
2950
3100
3250
3400
3570
3740
3900
4050 4250
4450
4670
4800
5050 | ±5 |
Note: Our company can also supply according to the special requirements of users
Reduced power consumption curve:
A
mbient temperature (℃)
Rated power 0.5W
| Specification and model | Zero power resistance rated at 25℃ | Resistance value accuracy(%) | Value | B-value accuracy |
| MF11-050 | 5 | ±5
±10
±20 | 2400 | ±5
±10 |
| MF11-100 | 10 | 2800 |
| MF11-150 | 15 | 2800 |
| MF11-200 | 20 | 2800 |
| MF11-220 | 22 | 2800 |
| MF11-270 | 27 | 3000 |
| MF11-330 | 33 | 3000 |
| MF11-390 | 39 | 3000 |
| MF11-470 | 47 | 3100 |
| MF11-500 | 50 | 3100 |
| MF11-680 | 68 | 3100 |
| MF11-820 | 82 | 3100 |
| MF11-101 | 100 | 3200 |
| MF11-121 | 120 | 3200 |
| MF11-151 | 150 | 3200 |
| MF11-201 | 200 | 3200 |
| MF11-221 | 220 | 3500 |
| MF11-271 | 270 | 3500 |
| MF11-331 | 330 | 3500 |
| MF11-391 | 390 | 3500 |
| MF11-471 | 470 | 3500 |
| MF11-501 | 500 | 3500 |
| MF11-561 | 560 | 3500 |
| MF11-681 | 680 | 3800 |
| MF11-821 | 820 | 3800 |
| MF11-102 | 1000 | 3800 |
| MF11-122 | 1200 | 3800 |
| MF11-152 | 1500 | 3800 |
| MF11-202 | 2000 | 4000 |
| MF11-222 | 2200 | 4000 |
| MF11-272 | 2700 | 4000 |
| MF11-302 | 3000 | 4000 |
| MF11-332 | 3300 | 4000 |
| MF11-392 | 3900 | 4000 |
| MF11-472 | 4700 | 4050 |
| MF11-502 | 5000 | 4050 |
| MF11-562 | 5600 | 4050 |
| MF11-682 | 6800 | 4050 |
| MF11-822 | 8200 | 4050 |
| MF11-103 | 10000 | 4050 |
| MF11-123 | 12000 | 4050 |
| MF11-153 | 15000 | 4150 |
| MF11-203 | 20000 | 4300 |
| MF11-303 | 30000 | 4300 |
| MF11-473 | 47000 | 4300 |
| MF11-503 | 50000 | 4300 |
| MF11-683 | 68000 | 4300 |
| MF11-104 | 100000 | 4500 |
| MF11-124 | 120000 | 4700 |
| MF11-154 | 150000 | 4700 |
| MF11-204 | 200000 | 4700 |
| MF11-304 | 300000 | 4700 |
| MF11-504 | 500000 | 4800 |
| MF11-105 | 1000000 | 4900 |
Note: Our company can also supply according to the special requirements of customers
MF72 Power NTC Thermistor Series
Applications
Coversion power-supply, switch power, ups power
Electronic energy saving lamps,electronic ballast and all kinds of electric heater
All kinds of RT, display
Bulb and other lighting lamps
Conventional product electrical performance parameters
| Part No.Mf72 | R25 | Max,Steady Stale Current(A) | Approx. R of Maz.Cur. | Dissi.Coef.(MW/℃) | Thermal time Constant(S) | Operating Temp.(℃) |
| 5D5 | 5 | 1 | 0.353 | 6 | 20 | -55~+200 |
| 10D5 | 10 | 0.7 | 0.771 | 6 | 20 |
| 60D5 | 60 | 0.3 | 1.878 | 6 | 18 |
| 200D5 | 200 | 0.1 | 18.70 | 6 | 18 |
| 5D7 | 5 | 2 | 0.283 | 10 | 30 |
| 8D7 | 8 | 1 | 0.539 | 9 | 28 |
| 10D7 | 10 | 1 | 0.616 | 9 | 27 |
| 12D7 | 12 | 1 | 0.816 | 9 | 27 |
| 16D7 | 16 | 0.7 | 1.003 | 9 | 27 |
| 22D7 | 22 | 0.6 | 1.108 | 9 | 27 |
| 33D7 | 33 | 0.5 | 1.485 | 10 | 28 |
| 200D7 | 200 | 0.2 | 11.65 | 11 | 28 |
| 3D9 | 3 | 4 | 0.120 | 11 | 35 |
| 4D9 | 4 | 3 | 0.190 | 11 | 35 |
| 5D9 | 5 | 3 | 0.210 | 11 | 34 |
| 6D9 | 6 | 2 | 0.315 | 11 | 34 |
| 8D9 | 8 | 2 | 0.400 | 11 | 32 |
| 10D9 | 10 | 2 | 0.458 | 11 | 32 |
| 12D9 | 12 | 1 | 0.652 | 11 | 32 |
| 16D9 | 16 | 1 | 0.802 | 11 | 31 |
| 20D9 | 20 | 1 | 0.864 | 11 | 30 |
| 22D9 | 22 | 1 | 0.950 | 11 | 30 |
| 30D9 | 30 | 1 | 1.022 | 11 | 30 |
| 33D9 | 33 | 1 | 1.124 | 11 | 30 |
| 50D9 | 50 | 1 | 1.252 | 11 | 30 |
| 60D9 | 60 | 0.8 | 1.502 | 11 | 30 |
| 80D9 | 80 | 0.8 | 2.010 | 11 | 30 |
| 120D9 | 120 | 0.8 | 3.015 | 11 | 30 |
| 200D9 | 200 | 0.5 | 5.007 | 11 | 32 |
| 400D9 | 400 | 0.2 | 30.30 | 11 | 32 |
| 2.5D11 | 2.5 | 5 | 0.095 | 13 | 43 |
| 3D11 | 3 | 5 | 0.100 | 13 | 43 |
| 4D11 | 4 | 4 | 0.150 | 13 | 44 |
| 5D11 | 5 | 4 | 0.156 | 13 | 45 |
| 6D11 | 6 | 3 | 0.240 | 13 | 45 |
| 8D11 | 8 | 3 | 0.255 | 14 | 47 |
| 10D11 | 10 | 3 | 0.275 | 14 | 47 |
| 12D11 | 12 | 2 | 0.462 | 14 | 48 |
| 16D11 | 16 | 2 | 0.470 | 14 | 50 |
| 20D11 | 20 | 2 | 0.512 | 15 | 52 |
| 22D11 | 22 | 2 | 0.563 | 15 | 52 |
| 30D11 | 30 | 1.5 | 0.667 | 15 | 52 |
| 33D11 | 33 | 1.5 | 0.734 | 15 | 52 |
| 50D11 | 50 | 1.5 | 1.021 | 15 | 52 |
| 60D11 | 60 | 1.5 | 1.215 | 15 | 52 |
| 80D11 | 80 | 1.2 | 1.656 | 15 | 52 |
| 1.3D13 | 1.3 | 7 | 0.062 | 13 | 52 |
| 1.5D13 | 1.5 | 7 | 0.073 | 13 | 60 |
| 2.5D13 | 2.5 | 6 | 0.088 | 13 | 160 |
| 3D13 | 3 | 6 | 0.092 | 14 | 60 |
| 4D13 | 4 | 5 | 0.120 | 15 | 67 |
| 5D13 | 5 | 5 | 0.125 | 15 | 68 |
| 6D13 | 6 | 4 | 0.170 | 15 | 65 |
| 7D13 | 7 | 4 | 0.188 | 15 | 65 |
| 8D13 | 8 | 4 | 0.194 | 15 | 60 |
| 10D13 | 10 | 4 | 0.206 | 15 | 65 |
| 12D13 | 12 | 3 | 0.316 | 16 | 65 |
| 15D13 | 15 | 3 | 0.335 | 16 | 60 |
| 16D13 | 16 | 3 | 0.338 | 16 | 60 |
| 20D13 | 20 | 3 | 0.372 | 16 | 65 |
| 30D13 | 30 | 2.5 | 0.517 | 16 | 65 |
| 47D13 | 47 | 2 | 0.810 | 17 | 65 |
| 120D13 | 120 | 1.2 | 2.124 | 16 | 65 |
| 1.3D15 | 1.3 | 8 | 0.048 | 18 | 65 |
| 1.5D15 | 1.5 | 8 | 0.052 | 18 | 68 |
| 3D15 | 3 | 7 | 0.075 | 18 | 69 |
| 5D15 | 5 | 6 | 0.112 | 18 | 76 |
| 6D15 | 6 | 5 | 0.155 | 20 | 76 |
| 7D15 | 7 | 5 | 0.173 | 20 | 80 |
| 8D15 | 8 | 5 | 0.178 | 20 | 80 |
| 10D15 | 10 | 5 | 0.180 | 20 | 80 |
| 12D15 | 12 | 4 | 0.250 | 20 | 80 |
| 15D15 | 15 | 4 | 0.268 | 21 | 75 |
| 16D15 | 16 | 4 | 0.276 | 21 | 75 |
| 20D15 | 20 | 4 | 0.288 | 21 | 85 |
| 30D15 | 30 | 3.5 | 0.438 | 21 | 70 |
| 47D15 | 47 | 3 | 0.680 | 21 | 86 |
| 120D15 | 120 | 1.8 | 1.652 | 22 | 87 |
| 0.7D20 | 0.7 | 11 | 0.018 | 24 | 89 |
| 1.3D20 | 1.3 | 9 | 0.037 | 24 | 88 |
| 3D20 | 3 | 8 | 0.055 | 24 | 88 |
| 5D20 | 5 | 7 | 0.087 | 24 | 87 |
| 6D20 | 6 | 6 | 0.113 | 25 | 103 |
| 8D20 | 8 | 6 | 0.142 | 25 | 105 |
| 10D20 | 10 | 6 | 0.162 | 25 | 102 |
| 12D20 | 12 | 5 | 0.195 | 25 | 100 |
| 16D20 | 16 | 5 | 0.212 | 25 | 100 |
| 0.7D25 | 0.7 | 12 | 0.014 | 30 | 120 |
| 1.5D25 | 1.5 | 10 | 0.027 | 30 | 121 |
| 3D25 | 3 | 9 | 0.044 | 32 | 124 |
| 5D25 | 5 | 8 | 0.070 | 32 | 125 |
| 8D25 | 8 | 7 | 0.114 | 33 | 125 |
| 10D25 | 10 | 7 | 0.130 | 32 | 125 |
| 12D25 | 12 | 6 | 0.156 | 32 | 126 |
| 16D25 | 16 | 6 | 0.160 | 35 | 126 |
Application·Scope
Support and Services:
Support and Services:
Our NTC thermistor product comes with comprehensive technical support and services to ensure that your product functions optimally. Our team of experts is available to assist you with any technical queries or issues you may encounter during installation, operation, or maintenance of the product. Some of the technical support and services we offer include:
- Assistance with product selection and customization
- Technical documentation and datasheets
- Product testing and calibration
- Product repair and warranty services
- Training and education on product usage and maintenance
We are committed to providing our customers with high-quality technical support and services to ensure that they achieve their desired outcomes with our NTC thermistor product.
Packing and Shipping:
Product Packaging:
The NTC Thermistor product comes in a small, rectangular box measuring 3 inches by 2 inches by 1 inch. The box is made of sturdy cardboard and includes a foam insert to protect the product during shipping. The product is wrapped in bubble wrap and sealed in a plastic bag to ensure it stays clean and dry during transit.
Shipping:
We offer free shipping for the NTC Thermistor product within the United States. For international orders, shipping rates will vary based on the destination country. We use USPS for all shipments and provide a tracking number once the order has been processed. Please allow 3-5 business days for processing and 5-7 business days for delivery within the US. International delivery times may vary depending on the destination country.
FAQ:
Q: What is the brand name of this product?
A: The brand name of this product is lin kun.
Q: What is the model number of this product?
A: The model number of this product is NTC thermistor.
Q: Where is this product made?
A: This product is made in Dong Guan China.
Q: What certifications does this product have?
A: This product has ROHS and UL certifications.
Q: What is the minimum order quantity for this product?
A: The minimum order quantity for this product is 5000 PCS.
Q: What is the price of this product?
A: The price of this product is 0.045 USD/PCS.
Q: What is the packaging detail of this product?
A: The packaging detail of this product is bulk, 500pcs per polybag.
Q: What is the delivery time for this product?
A: The delivery time for this product is 7 workdays.
Q: What are the payment terms for this product?
A: The payment terms for this product are T/T.
Q: What is the supply ability of this product?
A: The supply ability of this product is 20,000,000PCS per week.
