MG tower type Full automatic dry mortar production line is arranged
from top to bottom according to the production process, the
production process is smooth, the product variety is large, and the
cross-contamination of raw materials is small. It is suitable for
the production of ordinary mortar and various special mortars. In
addition, the entire production line covers a small area, has a
outward appearance, and has relatively low energy consumption.
However, compared to other process structures, the initial
investment is relatively large.
MG Full automatic dry mortar production line dry mortar mixer
machine production process:
The wet sand is dried by a three-pass dryer, and then conveyed to
the classification sieve on the top of the tower through a plate
chain bucket elevator. The classification accuracy of the sieve is
as high as 85%, which facilitates fine production and stable
efficient. The number of screen layers can be set according to
different process requirements. In general, four types of products
are obtained after the classification of dry sand, which are stored
in four raw material tanks at the top of the tower. The cement,
gypsum and other raw material tanks are distributed on the side of
the main building, and the materials are conveyed by the screw
conveyor.
The materials in each raw material tank are transferred to the
measuring bin using variable frequency feeding and intelligent
electrical technology. The measuring bin has high measurement
accuracy, stable operation, and a cone-shaped bin body with no
residue.
After the material is weighed, the pneumatic valve below the
measuring bin opens and material enters the mixing main machine by
self-flow. The configuration of the main machine is usually a
dual-shaft gravity-free mixer and a coulter mixer. Short mixing
time, high efficiency, energy saving, wear resistance and loss
prevention. After the mixing is completed, the materials enter the
buffer warehouse. A variety of models of automatic packaging
machines are configured under the buffer warehouse. For high-volume
production lines, the integrated design of automatic packaging,
palletizing, and packaging production can be achieved, saving labor
and reducing labor intensity. In addition, an efficient dust
removal system is installed to create a good working environment
and meet environmental protection requirements.
The entire production line adopts advanced computer synchronous
production management and control system, which supports fault
early warning, controls product quality, and saves labor costs.
Configuration of MG Full automatic dry mortar production line dry
mortar mixer machine:
| No. | Name | Function |
| 1 | Raw material storage silo | Store the raw materials |
| 2 | Screw conveyor | Conveying raw material from silo to weighing hopper |
| 3 | Weighing hopper | Weighing the raw material as formula requirement |
| 4 | Bucke elevator | Lift raw material from ground to premix hopper and mixer |
| 5 | Premix hopper | Storage one batch material above mixer |
| 6 | Mixer | Mixing raw material uniformally |
| 7 | Finish product hopper | Storage one batch finis product for packing |
| 8 | Auto packing machine | Pack the product into bags as requirement |
| 9 | Dust collector | Collecting the dust when machine production |
Working site of MG Full automatic dry mortar production line dry
mortar mixer machine:
3D drawing of MG Full automatic dry mortar production line dry
mortar mixer machine:
Application of MG Full automatic dry mortar production line dry
mortar mixer machine:
Factory of Zhengzhou MG and the Full automatic dry mortar
production line:
MG Full automatic dry mortar production line dry mortar mixer
machine loading to Tanzania:
Other Bigger capacity Full automatic dry mortar production line dry
mortar mixer machine of our factory:
FAQ:
1, How about the investment of this project?
A: Our engineer can design the dry mortar plant as your requirement
and your budget, different dry mortar plant investment are difference.
Low capacity low cost, we will provide you cost effective solutions
as your requirement.
2, How many people required to operate this dry mortar plant?
A: Usually 2-4 workers are enogh to operate this dry mortar plant.
3, What equipment and service you can provide?
A: We can provide you turnkey solution of dry mortar plant from
working site planning to dry mortar machines, transportation, installation and training, formula of dry
mortars, after-sales services, life time technical support etc.
4, What is the area required for this dry mortar plant?
A: According to the capacity of the dry mortar plant, the area
required 300-1000 m2.
5, What is the total power consumption (KW) of this dry mortar
plant?
A: It is 60-150KW based on the capacity of the dry mortar plant.
6, What is the capacity of your dry mortar plant?
A: We have dry mortar plant with capacity 3-30T/H as your
requirement, and also we can customize the dry mortar plant as your capacity requirement.
7, How long is the guarantee period?
A: 12 months, within this period, we provide you spare parts and
services for free.
8, Can you install the dry mortar plant in my country?
A: Yes, we will send engineers to your country for guiding
installation and training your workers to operate the machine.
If you want to know more of our dry mortar plant, please send us
inquiry or contact us directly.
