Sign In | Join Free | My burrillandco.com
Home > Measuring & Gauging Tools >

IEC62368-1 300V Limited Short Circuit Current Withstand Test System

    Buy cheap IEC62368-1 300V Limited Short Circuit Current Withstand Test System from wholesalers
     
    Buy cheap IEC62368-1 300V Limited Short Circuit Current Withstand Test System from wholesalers
    • Buy cheap IEC62368-1 300V Limited Short Circuit Current Withstand Test System from wholesalers
    • Buy cheap IEC62368-1 300V Limited Short Circuit Current Withstand Test System from wholesalers

    IEC62368-1 300V Limited Short Circuit Current Withstand Test System

    Ask Lasest Price
    Brand Name : Sinuo
    Model Number : SNQC1020A
    Certification : Calibration Certificate (Cost Additional)
    Payment Terms : T/T
    Supply Ability : 10 Sets Per Month
    Delivery Time : 30 Days
    • Product Details
    • Company Profile

    IEC62368-1 300V Limited Short Circuit Current Withstand Test System


    IEC62368-1 300V Limited Short Circuit Current Withstand Test System


    Complied Standards & Clauses



    Conforms to Appendix R in IEC62368-1:2019.


    Product Overview



    The system uses an energy storage device to store energy according to the set parameters, and discharges when the set voltage is reached to realize the large current output test function. The attenuation oscillation frequency of the current is 50±2Hz, simulating the power frequency, and the peak current can reach 14KA (10KA sine wave peak), it will automatically charge for the next round of testing after the discharge is completed.

    During the test process, the discharge current waveform is recorded and the current-time curve is automatically generated.

    Meet the testing requirements of power supply power of 300V*10KA=3MVA in ordinary laboratories;

    In the above schematic block diagram, the design is damped attenuation oscillation (α<1), and the loop equation is:



    The actual current waveform is shown in Figure a above.


    Technical Parameters



    Discharge peak currentDigitally configurable
    Discharge voltageProgrammable control
    Discharge voltage rangeDC10-300V, automatically controlled by program
    Discharge peak limit currentNot less than 14KA (sine wave peak value of 10KA)
    Discharge time

    Not less than 20ms, attenuate oscillation according to sinusoidal curve

    (Using special charging and discharging components for high-efficiency energy storage, no memory effect, long life)

    Deviation range during testCurrent 95% ~ 105%; voltage 100% ~ 105%; frequency 95% ~ 105%;
    Current accuracyLevel 0.5 or better, resolution ≤1A;
    Voltage accuracyLevel 1 or better, resolution ≤1V;
    Discharge resistor

    1.Made of constantan wire material, the resistance is stable and reliable for a long time

    2. Special high-current contactor switch is used for switching control

    Current waveformUsing high-precision Rogowski coil measurement, the measuring range is 20KA and the bandwidth can reach 2MHz.
    Control host

    1. Use an integrated LCD touch screen computer host with a 15-inch monitor, 64G solid-state drive, and 8G memory.

    2. Configure a high-speed data acquisition card to accurately measure the discharge current waveform.

    3. The current waveform curve can be stored and exported.

    4. After the parameters are set, the program automatically tests, automatically analyzes the loop impedance, and automatically adjusts the voltage to adapt.

    Protective functionEquipped with overvoltage and overcurrent protection function
    Device output interface

    A. Protection switch SCPD (such as 25A) or fuse: the user can connect it externally by himself

    B. Output wire: According to the cross-sectional area of ​​the wire number, the user can connect it by himself

    C. When the equipment leaves the factory, an acrylic protective cover is provided, which can be adapted to most products under test.

    Device power supplyAC220V 50Hz/60Hz,5KVA,
    Equipment dimensionsApproximate W1800×D900×H1800mm
    Equipment weight750Kg
    Working environmentTemperature 0~30℃, relative humidity no more than 80% and no condensation, steam and corrosive gas

    Details



    Quality IEC62368-1 300V Limited Short Circuit Current Withstand Test System for sale
    • Haven't found right suppliers
    • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
    • And this service is free of charge.
    • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
    Submit Buying Request
    Send your message to this supplier
    *From:
    Your email address is incorrect!
    *Subject:
    Your subject must be between 10-255 characters!
    *Message:
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
     
    *From:
    *To: Sinuo Testing Equipment Co. , Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Explore more EV Connector Testing Equipment products from this supplier
    Find Similar Products By Category:
    Inquiry Cart 0