LED Display Solder Paste Aging Machine Solder Paste Check Right
Machine With Alarm System
Introduce
Solder Paste Aging Machine is a special testing equipment used to
test the aging characteristics of solder paste (Solder Paste).
This machine mainly has the following functions and features:
Function:
Simulate the aging of the solder paste during the actual production
process and test the storage life of the solder paste.
By controlling environmental parameters such as temperature and
humidity, the aging process of solder paste is accelerated.
Measure the performance indicators of solder paste under different
aging degrees, such as viscosity, activity, printability, etc.
Provide manufacturers with reference data on the service life of
solder paste and guide the reasonable storage and use of solder
paste.
main feature:
Programmable temperature, humidity, and time parameters simulate
various aging environments.
Equipped with a sophisticated testing system, it can monitor and
record changes in solder paste performance indicators in real time.
The sample storage space is large and multiple solder paste models
can be tested at the same time.
The operation interface is friendly and the data analysis function
is powerful.
main component:
Constant temperature and humidity aging box: Provides programmable
temperature and humidity environment.
Sample tray: Place the solder paste samples that need to be tested.
Performance testing module: including viscometer, printing machine,
etc., to test solder paste performance parameters.
Data collection and analysis system: records and analyzes test data
in real time.
Application scenarios:
Solder paste manufacturers use this machine to perform aging tests
on the solder paste they produce.
Electronics manufacturers can perform aging testing on samples to
verify before using solder paste.
R&D personnel use this equipment to develop new solder pastes
and optimize solder paste formulas
Features
1, Electricy and air pressure driven combined.
2, Use the timer to timing the solder paste back to room
temperature instead of operator record.
3, LED display timer system, easy to set and accurate timing.
4, Aging tank is designed for standard size solder paste.
5, Aging tank with FIFO function, after timing, take out the solder
paste during order.
6, In the case of out of power accidently, even if not reach setted
time, solder paste bottle will automatically pop up.
7, With alarm system, it rings when finished timing, also equipped
with a emergency button.
Specification
| Model | HS-SP-8 |
| Timer | LED display timer |
| Tank size | For standard solder paste, others need customized |
| Power | AC220V, 50Hz |
| Air Pressure: | 0.4Mpa |
| Placing tank: | 8 tanks |
| Machine Demension: | 500*520*320mm(W*D*H) |
| Gross Weight: | 22KG |
