Wet Room Tile Backer Board Fixing Washers Stainless Steel – 100
Pack
Description Of Wet Room Tile Backer Board Fixing Washers:
The tile backer board fixing washers are widely used to fix
insulation boards, tile backer boards, foam slate, gypsum boards, composite boards extruded plates, you
can also directly use the washers for fix the building board to the frame.
If you are in need of tile backer board metal fixing washers,
please feel free to ask me a price, or a sample,
my email is cherry@huihaomesh.com
| material | thickness | diameter | center hole |
galvanized steel | 0.6mm | 36mm | 5mm |
| stainless steel | 0.6mm | 36mm | 5mm |
1: The tile backer board fixing washers are made of high-quality galvanized steel or stainless steel
material, it's firm and durable, not easily deformed, and are
protected from corrosion and anti-wear.
2: The tile backer board fixing washers are compatible with Marmox, Wedi, Aquapanel, Thermopanel,
Plasterboard, Duccaboard, Celotex Insulation board, Insulation
Board and Plasterboard.
3: The tile backer board fixing washers have a counter sunk mid-section to allow the screw head to pull into the board but the outer rim of the washer to remain
flush with the board surface. This is to maintain the flat board
surface ready for easy unhindered application of the subsequent
layers. |
Detailed Image Of Wet Room Tile Backer Board Fixing Washers:
Application Of The Wet Room Tile Backer Board Fixing Washers:
1. When using these easy fix washers to fix tile backer boards to walls, ceilings, or floors, it is recommended to use 15 washers per 1200 x 600mm board. 2. This is only a guide and specifically it's depended on the type,
thickness, sub surface and what is to be put onto the board. 3. It is the installers responsibility to use the correct number of
washers to hold the tile backer board in place. |
 |  |
Package Of The Wet Room Tile Backer Board Fixing Washers:
1. 50 pcs/bag, 100 pcs/bag, 200 pcs/bag or as your requirement 2. paper carton 3. wood pallet 4. special package requirement is supported and could be customized 5. special logo could be customized and stamped on the washers |
  |
FAQ Of Huihao Hardware Mesh Product Limited.
1. Are you a manufacture or a trader?
We are a manufacture, located in Hebei province, China.
2. Do you support product customization?
Yes, the material and the size, all could be customized.
3. Do you support package customization?
Yes, the package could be customized according to your need.
4. Can you stamp the logo on the washers?
Yes, the laser logos could be customized and stamped on the
washers.
5. Can i get samples?
Yes, we have free samples for you to check the quality.
6. Can you promise the quality?
Yes, our quality is high standard.
