Waste refrigerator crushing sorting machine
Waste refrigerator crushing sorting equipment:
Waste Refrigerator Recycling Production Line, after feeding, goes
through multiple processing procedures, and presents the purest
Copper, Aluminum, Iron, Plastic and Foam.
1. When the waste refrigerator (or freezer) is on the unpowered
drum, disassembleit manually and remove the plastic and glass from
the box.
2. According to different types of refrigerants, refrigerant
recovery devices are usedto classify and recover refrigerants.
Remove the compressor and condenser,etc.
3. The whole machine enters a double-shaft shredder for shredding
and preliminarycrushing.
4. The materials enter the hammer crusher, and are crushed for the
second timethrough crushing and kneading by the crusher.
Waste refrigerator crushing sorting equipment technical
characteristics
1. Heavy moving blade,high crushing power,the blade is made of
wear-resistant steel,strong wear resistance, long service life.
2. It is driven by decelerating motor, with strong power, low
speed, large torque, low noise, time-saving and labor-saving.
3. The product belongs to the fully automated equipment, set up
start, stop, reverse and overload automatic reverse control
functions, the use of complete functions, convenient and fast.
4. The blade arrangement and bite mode are designed for metal, and
the thickness of props and the number of claws can be changed
according to different materials.
5. Easy to adjust, low maintenance cost, uniform discharge, long
use time.
WORKFLOW
1.When the waste refrigerator (or freezer) is on the unpowered
drum, disassembleit manually and remove the plastic and glass from
the box.2.According to different types of refrigerants, refrigerant
recovery devices are usedto classify and recover refrigerants.
Remove the compressor and condenser,etc.
3.The whole machine enters a double-shaft shredder for shredding
and preliminarycrushing.
4.The materials enter the hammer crusher, and are crushed for the
second timethrough crushing and kneading by the crusher.
5.At the same time of secondary crushing, part of polyurethane foam
will beseparated into foam separator by air separation. Heavy
materials such as plasticand metal enter the belt conveyor.6.Materials crushed by plastic and metal are separated by magnetic
separation onthe belt, and then enter eddy current separation.
7.Non-ferrous metals, such as copper and aluminum, are separated by
eddycurrent,and plastic and foam materials are transported to the
airflow separationsystem through belts to separate pure plastic and
foam. Polyurethane foam iscompressed into blocks by a foam crusher.
Waste refrigerator crushing sorting equipment:
At the same time of secondary crushing, part of polyurethane foam
will beseparated into foam separator by air separation. Heavy
materials such as plasticand metal enter the belt conveyor.
Materials crushed by plastic and metal are separated by magnetic
separation onthe belt, and then enter eddy current separation.
Non-ferrous metals, such as copper and aluminum, are separated by
eddycurrent,and plastic and foam materials are transported to the
airflow separationsystem through belts to separate pure plastic and
foam. Polyurethane foam iscompressed into blocks by a foam crusher.
Waste refrigerator crushing sorting equipment:
