Product Description:
Ceramic Beads blasting media are high-tech blasting media which are
made by high quality zirconia powder as raw material, then fused in
an electric furnace under high temperature over 2000 degrees,
finally made into different micro beads through special technology.
It has the advantages of smooth surface, good elasticity, no iron
polution, and can be recycled multi time, and can be used in both
dry and wet shooting equipment.
It is widely used to debur, remove oxide layer of industrial
components,finish metal surface, and do preparation before painting
and coating. It has great contributions to the aviation industry,
stainless steel products, medical equipment and mobile phones.
Features:
Surface Treatment Consistency
The main component of ceramic shot is zirconia, which is
characterized by small crystal size and high wear resistance.
Ceramic shot has high hardness, with Vickers hardness
(microhardness) of 700hv and Rockwell hardness of 600hrc. The
density and specific gravity are also much higher than those of
glass beads. No dust, high abrasion resistance and strength make it
difficult for ceramic shot to be broken during sand blasting, so it
is not easy to generate dust.
Environmental Friendly
Using ceramic shot sandblasting can achieve smooth satin surface
brightness. Using ceramic shot of the same specification is 60-70%
lower than that of glass bead sandblasting. It is suitable for dry
blasting and wet blasting. The surface of ceramic shot is very
smooth, and the wear of sand blasting equipment is very small.
Low Equipment Loss
It is suitable for various metals and nonmetals, such as titanium
alloy, magnesium alloy, aluminum alloy, stainless steel, carbon
steel, brass and alloy, acrylic, plastic and other materials.
Ceramic shot will not react or oxidize with metal, and there is no
metal residue, so it will not affect the color of the workpiece.
Ceramic shot has high sandblasting efficiency and long service
life, and its recycling times can reach 25 times of glass beads.
The roundness is high, and the proportion of abnormal balls and
snowman balls adhered between the spheres is low.
Strong Chemical Resistance
It ensures the consistency of surface blasting effect. It also has
strong chemical resistance so that it will not contaminate the work
piece surface. Furthermore, it is also recyclable, which can reduce
the refueling times and improve the working efficiency.
Technical Parameters:
| Property | Value |
|---|
| Refractoriness | 1790°C |
| True density | 3.86cm³ |
| Abrasive Grain | Alumina Oxide |
| Melting Point | 2050°C |
| Mohs hardness | 7.5 |
| Specific Gravity | 2.6-2.8 |
| Material | Ceramic |
| Maximum Operating Temperature | 1700°F |
| Chemical Composition | Al2O3 |
| Color | White |
| Application | Ceramic Bead Blasting, silicon carbide ceramic parts, industrial
ceramic parts |
Applications:
Surface treatment consistency
The main component of ceramic shot is zirconia, which is
characterized by small crystal size and high wear resistance.
Ceramic shot has high hardness, with Vickers hardness
(microhardness) of 700hv and Rockwell hardness of 600hrc. The
density and specific gravity are also much higher than those of
glass beads. Its blasting strength is as good as steel balls
processing effect, much higher than the glass beads strength. And
can achieve adequate metal depth.
Environmental Friendly
No dust emission, high abrasive resistance, strength and low
crushing rate, which make it difficult for ceramic shot to be
broken during sand blasting, so it is not easy to generate dust.
And no hiddendanger of silicosis, it is harmless to the human body.
Low equipment loss
Ceramic shot has high abrasion resistance and high sphericity,
which can protect the equipment from wear and tear. The surface
ofceramic shot is very smooth, and the wear of sand blasting
equipment is very small. Ceramic shot will not react or oxidize
with metal, and there is no metal residue, so it will not affect
the color of the workpiece.
Customization:
Fine-tech's Ceramic Blasting Media is a superior grade silicon
carbide ceramic part with ISO9001 certification, minimum order
quantity of 500KG and a chemical composition of Al2O3. It has a
melting point of 2050°C, low equipment wear and a true density of
3.86cm³. The price and delivery time are negotiable. It has a
supply ability of 2000t per year and is packaged in 25kg/barrel,
25kg/bag or 1t/pallet. Payment terms are L/C or T/T.
Support and Services:
Ceramic Blasting Media Technical Support and Service
Ceramic blasting media is an abrasive that is used to remove
surface contaminants, such as paint, rust, and scale. It is an
effective and efficient process to restore parts to their original
condition.
Our team of experts are here to help you select the best media for
your application, provide technical support, and help troubleshoot
any issues you may experience. We also provide training and on-site
support to ensure that you get the most out of your blasting media.
If you have any questions or need assistance, please do not
hesitate to contact us. We look forward to helping you with your
ceramic blasting media needs.
