Ceramic Beads B60: 0.150-0.300 mm for Aluminium alloy surface
sandblasting
DESCRIPTION OF CERAMIC BEADS
Ceramic beads blasting media is Zirconia based spherical blasting
media, produced by melting process
at more than 2000℃ temperature , and then blow into micro beads
B20-B505,
It's with true density 3.85 g/cm3, filling the gap between the high
density of steel shots (7.8g/cm3) and the low density of glass
beads (2.5g/cm3). It can reduce labor intensity of employees and is
a new ideal alternative product of glass beads.
Mainly used for aluminium alloy metal surface treatment.
SPECIFICATION OF CERAMIC BEADS
| Chemical Index | ZrO2 | SiO2 | Al2O3 |
| 60-65% | 25-30% | 7-13% |
| Typical Value | 62.20% | 26.10% | 9.05% |
| Bulk Density | 2.3g/cm3 |
| Specific Density | 3.85g/cm3 |
| Vickers Hardness | 700HV |
| Grit size | B20 | B30 | B40 | B60 | B80 | B100 | B120 |
| Microns μm | 600-850 | 425-600 | 250-425 | 125-250 | 180-250 | 125-180 | 63-125 |
| Grit size | B125 | B170 | B205 | B400 | B505 | Special sizes can be customized |
| Microns μm | 0-125 | 45-90 | 0-63 | 30-63 | 0-63 |
| Grit size | Z850 | Z600 | Z425 | Z300 | Z210 | Z150 | Z100 |
| Microns | 850-1180 | 600-850 | 425-600 | 300-425 | 210-300 | 150-210 | 100-150 |
FEATURES OF CERAMIC BEADS
- Spherical beads and Smooth surface, leading uniform and shiny metal
surface.
- Strong toughness, not easily broken, can be recyclable for
multi-times, with high cost perfermance.
- No dust pollution, eco-friendly sandblasting media.
APPLICATION OF CERAMIC BEADS
Aluminium alloy parts metal surface treatment
The mobile phone aluminum alloy is synthesized by a special
material processing technology. The ceramic sandblasting beads has
a smooth surface, high hardness and strong toughness, not easily
broken, and can be recycled multi-times, and has no dust pollution.
Comparing with other blasting media, the utilization rate has been
significantly improved.
Take the mobile middle frame for example, the ceramic beads is
sprayed on the surface of the aluminum alloy mobile middle frame
via the sandblasting machine to remove the oxide scale and burr
residue. At the same time, the finer ceramic beads like B170 or
B205 is used to finish the surface, remove the fine lines, and
restore the fine and consistent metallic luster...
APPLICABLE EQUIPMENT
- In sandblasting-Wet & Dry sandblasting mechine
Manual sandblasting machine
Automatic sandblasting machine
Open type sandblasting machine
Sandblasting machine room
CONTACT US
No matter you’re the abrasive trader, distributor, the end users,
blasting service suppliers, sandblasting equipment dealers or other blasting abrasive distributors, welcome to contact us. More
details of ceramic blasting beads, updated prices and samples will
be available.
Caroline Cui
Email: caroline@zzztabrasive.com
Zhengzhou Zhengtong Abrasive Imp.&Exp. Co., Ltd
Address: Ximazhuang, Liuzhai Town, Xinmi City, Henan, China
Tel.:+371 86592608
Mob.: +86 15003865330
http://www.ceramicbeadblasting.com/
