Description:
1. Polyamine flocculant is Quaternary Ammonium Cationic Polymer,
with various molecular weight polymeric.
2. It is a liquid cationic polymer, high purity, water-soluble, and
high efficiency, with positively charged ions.
3. Mainly used to synthesize various kinds of high molecular water
treating compounds. Its effects are electric neutralization,
adsorption, flocculation, purification, and decoloration, and is
also used for sewage treatment.
4. It has evident effects in the fields of decoloration, killing
algae, and removing organics.
5. It is especially effective with charged particles, to which
inorganic flocculants are ineffective.
6. It is used to remove the color of wastewater generated by
textiles process houses and dyes industries and paper mills.
7. Can be blended with inorganic polymers for water purification,
such as poly aluminum chloride (PAC) and aluminum chlorohydrate
(ACH).
Specifications:
Appearance: | Clear, Colorless to Light Straw Yellow, Transparent Colloid |
| Cas no.: | 42751-79-1 |
Grade: | Blu AM50 Series |
Relative Molecular Weight: | Medium to Very High |
Solid Content: | >50% |
Specific Gravity at 20°C: | 1.10-1.15 |
PH Value (1% Solution): | 4-8 |
Viscosity(25°C): | 500-10000cps |
Package: | 215kgs net plastic drum palletized |
Application Fields:
- For drinking water treatment and wastewater treatment
- As decolorant for syrup and juice decolorizing and clarification.
- As decolorant for textile effluent color removal
- Mining (coal, gold, diamonds, etc.) water recovery and purification
- Paper-making agent
- Oil industry
- Latex coagulation in rubber plants
- Meat process waste treatment
- Sludge dewatering polymer
- Drilling additives
Competitive Advantage:
1 | Easy to use as the liquid type. |
2 | Can be used alone or combined with inorganic coagulants, such as
Poly Aluminum Chloride. |
3 | Treat color wastewater from the textile, dyestuff, and paper
industries. |
4 | Used as a retention agent in paper & pulp processing |
5 | Fastsedimentation, good flocculation. |
6 | Non-pollution (no aluminum, chlorine, heavy metal ions, etc.).
Noncorrosive of suggested dosage, economical, and effective at low
levels. |
7 | Can eliminate the use of alum & further ferric salts when used as
primary coagulants. |
8 | Less sludge is produced than other inorganic coagulants. |
Application Methods:
1 | Mix Quaternary Ammonium Cationic Polymer with Poly Aluminium
Chloride for water treatment of turbid river and tap water etc. |
2 | When used alone, should be diluted to the concentration of
0.5%-0.05%( based on solid content). |
3 | The dosage is based on the turbidity and the concentration of the
different source water. The most economical dosage is based on the
trial. The dosing spot and the mixing velocity should be carefully
decided to guarantee that the chemical can be mixed evenly with the
other chemicals in the water and the flocs cannot be broken. |
Package and Storage:
- It is harmless, non-flammable, and non-explosive, it can be stored
at room temperature, and it can not be placed in the sun.
- It is packaged in plastic drums with each containing 25kg, 210kg,
1100kg, or others according to the requirements of clients.
- Storage temperature: Room temperature.
Bluwat Quaternary Ammonium Polymer Plant Snapshot:
Main Products:
- BWD-01 Water Decoloring Agent, for color removal for textile dyeing
wastewater treatment and for other wastewater.
- Poly Aluminium Chloride(PAC), for drinking water treatment for
wastewater treatment.
- Polyacrylamide (PAM)/Polyelectrolyte, for water treatment, for
sludge treatment.
- PHPA(Partially Hydrolyzed Polyacrylamide) For Drilling, for
drilling mud additive in the oilfield.
- Ferric Sulphate, for drinking water and wastewater treatment.
- PolyDADMAC, for water treatment and for paper mills, and cosmetics.
- Polyamine, for drinking and wastewater treatment, sludge
dewatering, paper making, and oilfield.
- Aluminum Chlorohydrate(ACH) liquid & powder, for drinking water
treatment and other fields
