Nonionic Polyacrylamide NPAM Blufloc Polyacrylamide:

Coal Mine

Washing

Coal washing tailing centrifugal separation

Sedimentation and filtration of coal powder and coal mud.

Highly improve the recovery rate of coal powder and the filtration speed.

Sewage Water

Treatment

Nonionic-polyacrylamide for acidophilic water systems.

If matched with PAC, aluminum sulphate, the effect will be excellent.

Metallurgical

Mineral Dressing

Textile Sizing, as a kind of composition for chemical grout, starch textiles

Highly improve the adhesive property, penetrability, and desizing performance,

enable the textile to have electrostatic prevention performance, reduces the

desizing rate, and reduces the starch mixing spots, cloth machine breaking

efficiency, and falling objects.

• Economical to use - lower dosage levels.
• Easily soluble in water; dissolves rapidly.
• Noncorrosive of suggested dosage, economical, and effective at low levels.
• Can eliminate the use of alum & further ferric salts when used as primary coagulants.
• Reduction in the sludge of the dewatering process system.
• Faster sedimentation, better flocculation.
• Non-pollution (no aluminum, chlorine, heavy metal ions, etc.).
• 10 years of manufacturing experience, with more than 20 technical engineers

Application and Dosage:
The dosage range varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage.
Jar Test:

Put a sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm, and then slowly agitate at 60 rpm. Determine the floc properly at this time and note the sedimentation and clarity of the top solution.
Procedure and precautions upon dispersion and dissolving flocculants:
Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature, and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. An incomplete mixture of flocculants or lumping may inhibit the performance of the flocculant.
Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high-speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be 1HP for a 1-2m3 mixing tank.
Dissolving concentration: Flocculants should be standardly dissolved to 0.1-0.2% concentration. It is also effective to start dissolving at a slightly higher concentration and then dilute the flocculant mixture immediately before use.
Handling measures and precautions:
Proper human safety products such as Splash goggles, lab coats, vapor respirators, gloves, and boots should be worn while handling and applying chemicals. Splashes on the skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer to MSDS for more details.

1. 25kg net kraft paper bags or white PE bags on pallet.
2. Stored in the original packaging in a cool and dry place.
3. Shelf life: 2 years.

1. BWD-01 Water Decoloring Agent, for color removal for textile dyeing wastewater treatment and for other wastewater.
2. Poly Aluminium Chloride(PAC), for drinking water treatment for wastewater treatment.
3. Polyacrylamide (PAM)/Polyelectrolyte, for water treatment, for sludge treatment.
4. PHPA(Partially Hydrolyzed Polyacrylamide) For Drilling, for drilling mud additive in the oilfield.
5. Ferric Sulphate, for drinking water and wastewater treatment.
6. PolyDADMAC, for water treatment and for paper mills, and cosmetics.
7. Polyamine, for drinking and wastewater treatment, sludge dewatering, paper making, and oilfield.
8. Aluminum Chlorohydrate(ACH) liquid & powder, for drinking water treatment and other fields.

Bluwat Chemicals is a professional supplier of water treatment chemicals in China. We provide our customers with both traditional and innovative products to ensure optimum control in a wide variety of applications, which include treatment of drinking water, wastewater, process water. We are trying our best to be a professional manufacturer and service supplier to reduce your treatment cost.

Our core products are coagulants and flocculants for water treatment and polymers for oil/gas drilling and EOR (enhanced oil recovery).

E-Business model and operation is the core value of Bluwat Chemicals, quick feedback, high efficiency, low operation cost, it is easy to establish cooperation relationships with partners all over the world. In the past 15 years, we sold more than 400,000 tons of our products to around 80 countries and regions.

Now, we are the Top manufacturer of BWD-01 Water Decoloring Agent in the world.

We built and invested 3 modern chemical plants in the past 10 years:

1. Bluwat Plant in Yixing in 2004: Leading and professional producer of BWD-01 Water Decoloring Agent, liquid polymer like PolyDADMAC, Polyamine etc.
2. Bluwat Plant in Zibo in 2006: Producing PAC with different grades, ferric sulphate powder and granule.
3. Bluwat Plant in Haibei in 2007: It is a Top 5 manufacturer in China, producing Polyacrylamide powder and emulsion with all grades.

We have professional technical teams to support our products innovation and quality control.

Welcome to visit our plants, and have a win-win cooperation together!

Blue Water, Green Life!