The HS series products differentiate themselves by utilizing
high-efficiency, low-loss U-shaped transformers, allowing for
better energy utilization. These transformers are complementary to
the mains and support generator start function, ensuring reliable
power supply in various environments. Additionally, these products
offer voltage dual output capability, giving users flexibility in
charging modes based on their needs.
Furthermore, the HS series products feature integrated management,
resulting in higher conversion rates and lower power consumption.
This design also enhances the product's load capacity, making it
suitable for demanding industrial applications. Overall, the HS
series is positioned as the top-tier industrial frequency inverter
on the market due to its superior performance and efficiency.
PRODUCT FEATURES:
1. Contains four functions of mains bypass, mains charging,
inverter,UPS, fully automatic switching
2. The efficiency is 3~5% higher than the ordinary power frequency
series, and the self-consumption
is reduced by 30~50%
3. DIP switch selection: battery undervoltage point, input AC
range, energysaving mode, priority mode
4. Remote communication interface RJ11/RJ45/RS232/485 remote
control panel (optional)
5. Support PC software monitoring, support WIFI 4G module expansion
to realize app cloud
monitoring (optional)
6. Pure sine wave output, input and output completely isolated
design
7. Contains AC four-stage charging mode, and the charging current
is automatically adjusted
8. It can be matched with commercial power, diesel engine power
generationand other mixed
power supply
9. Can withstand 3 times the rated power start, excellent load
capacity
10. LED display working status, LCD remote display operating
parameters
11. Undervoltage/overvoltage/short circuit/overload/over
temperature protection
12. Pure sine wave series inverters are suitable for renewable
energy systems,
utilities, RVs,Marine and emergency applications.
HS Series parameter table
| Electrical Specifications |
| Model HS | 1KW | 2KW | 3KW | 4KW | 5KW | 6KW | 8KW | 10KW | 12KW |
Inverter
Output | Continuous
Output Power | 1000W | 2000W | 3000W | 4000W | 5000W | 6000W | 8000W | 10000W | 12000W |
Surge
Rating(20ms) | 3KW | 6KW | 9KW | 12KW | 15KW | 18KW | 24KW | 30KW | 36KW |
Output
Waveform | Pure Sine wave/Same as input(Bypass Mode) |
Nominal
Efficiency | >88%(Peak) |
Line Mode
Efficiency | >95% |
| Power Factor | 0.9-1.0 |
Nominal Output
Voltage rms | 100-110-120Vac / 220-230-240Vac |
| Output Voltage
Regulation | ±10% RMS |
Output
Frequency | 50Hz ± 0.3Hz/60Hz ± 0.3Hz |
Short Circuit
Protection | Yes( 1sec after fault ) |
Typical transfer
Time | 10ms(Max) |
| THD | < 10% |
DC
Input | Nominal Input
Voltage | 12.0Vdc / 24.0Vdc /
48.0Vdc | 24.0Vdc / 48.0Vdc | 48.0Vdc |
Minimum Start
Voltage | 10.0Vdc / 10.5Vdc for
12Vdc Mode | *2 for 24Vdc, *4 for 48Vdc; |
Low Battery
Alarm | 10.5Vdc / 11.0Vdc for
12Vdc Mode |
| Low Battery Trip | 10.0Vdc / 10.5Vdc for
12Vdc Mode |
High Voltage
Alarm | 16.0Vdc for 12Vdc Mode |
Low Battery
voltage recover | 15.5Vdc for 12Vdc Mode |
Idle
Consumption-Se
arch Mode | < 25 W when Power Saver On.(Refer to Table ) |
| Charger | Output Voltage | Depends on battery type (Refer to Table 2.5.2) |
Charger Breaker
Rating | 10A | 20A | 30A | 40A | 40A | 40A | 50A | 80A | 80A |
Max Charge
Power Rate | 1/3 Rating Power (Refer to Table 2.5.3) |
Battery Initial
Voltage for Start | 10-15.7Vdc for 12Vdc
Mode | *2 for 24Vdc, *4 for 48Vdc; |
Over Charge
Protection S.D. | 15.7Vdc for 12Vdc Mode |
| BTS | Battery
Temperature
Sensor
(Optional) | Yes(Refer to the table )
Variances in Charging Voltage & S.D Voltage Base on the Battery
Temperature. |
Bypass
&
Protection | Input Voltage
Waveform | Sine wave (Grid or Generator) |
| Nominal Voltage | 100-110-120Vac / 220-230-240Vac |
| Max Input AC
Voltage | 150VAC For 120Vac LV Mode ；300VAC For 230Vac HV Mode； |
Nominal Input
Frequency | 50Hz or 60Hz |
| Low Freq Trip | 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz |
| High Freq Trip | 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz |
Overload
protection
(SMPS load) | Circuit Breaker |
Output Short
circuit protection | Circuit Breaker |
Bypass breaker
rating | 10A | 20A | 30A | 40A | 40A | 40A | 50A | 80A | 80A |
Transfer switch
rating | 30Amp for UL & TUV | 40Amp for UL | 80Amp for UL |
Bypass without
battery
connected | Yes (Optional) |
Max bypass
current | 30Amp | 40Amp | 80Amp |
Mechanical
Specifications | Mounting | Wall Mount |
Inverter
Dimensions(L*W
*H) | 340*
420*
200mm | 425*375*200mm | 560*420*235mm | 655*490*240mm |
Inverter housing
size
(L*W*H) | 415*
440*
300mm | 500*495*300mm | 660*470*310mm | 720*470*290mm |
Inverter
Weight(Solar
Chg)KG | 16 | 19.5 | 24 | 31.5 | 33.5 | 37.5 | 56.5 | 58.5 | 61.5 |
Shipping
Weight(Solar
Chg)KG | 19 | 22 | 26.5 | 38 | 40 | 44 | 63.5 | 66 | 68.5 |
| Display | Status LEDs / Status LEDs+LCD |
Standard
Warranty | 2 Years (Optional) |
If the product model specification changes without notice
