LSZH Duplex SC/UPC to FC/UPC SM Fiber Optic Patch Cord
Fiber patch cord have different fiber connector type : LC,
SC,FC,ST,MTP/MPO etc. If you connect two devices with the same
interfaces, you can use LC-LC, SC-SC patch cord with the same
interface at both ends. If there are two devices with different
interfaces, you can choose patch cord with different ends,such as
LC-SC or LC-FC etc. Commonly used end face type are APC and UPC.
Because the optical fiber loss of APC type is lower than UPC
type,so the optical performance of APC type is better than UPC
type.The APC type are widely used in FTTX,PON and WDM fiber optic
equipment that is more sensitive to return loss. But APC type are
usually expensive than UPC type,so you should consider use APC or
UPC according to your actual situation.
Specification:
| Insertion Loss | ≤ 0.3 dB for SM |
| ≤ 0.4 dB for MM |
| Return Loss (except MM) | ≥ 45 dB (PC) |
| ≥ 50 dB (SPC) |
| ≥ 55 dB (UPC) |
| ≥ 65 dB (APC) |
| Repeat ability | 0.2 dB (500 Cycle Passed) |
| Operating Temp Range | - 40°C to +75°C |
| Storage Temp Range | - 40°C to +85°C |
| Humidity | 95% RH (Non Packaging) |
Application:
1.1 CATV
1.2 Computer networks
1.3 Telecommunication networks
1.4 ODF of optical transmission system
1.5 High speed data transmission network
1.6 High quality graphic transmission network
1.7 Connection of optical transmission device
Selection Considerations:
2.1 Distance & Bandwidth: Choose SMF for long-haul, MMF for
short-range.
2.2 Environment: Armored or ruggedized for industrial use.
2.3 Connector Compatibility: Match existing equipment (LC/SC/MPO).
2.4 Polish Type: APC for analog/CATV, UPC for digital.
Features:
3.1 Various connector type available
3.2 Low back reflection loss
3.3 Compact size
