W01-358-0010 Firestone Pneumatics Bellows 16 Style Rubber Air Spring For Concrete Brick Machine

W01-358-0010 Firestone Pneumatics Bellows 16 Style Rubber Air Spring For Concrete Brick Machine

Product Describe

Can Repalce The Following Manufacturer Number

Firestone: W01-358-7001

Firestone: W01 358 7001

Firestone: W013587001

Description: Blind nuts,1/4NPT

Firestone: W01-358-6996

Firestone: W01 358 6996

Firestone: W013586996

Description: Blind nuts,3/4NPT

Firestone: W01-358-0017

Firestone: W01 358 0017

Firestone: W013580017

Description: Socket head aluminum bead rings(bolts,nuts ,washers nit included-use 1/4 cap screws

Firestone: W01-358-0286

Firestone: W01 358 0286

Firestone: W013580286

Description: 3/4NPT(only) upper plate, blind nuts lower plate

Firestone: W01-358-0010

Firestone: W01 358 0010

Firestone: W013580010

Description: Rubber bellows only

Why Can Only the Rubber Portion of an Industrial Air Spring be Replaced?

1. Modular Structural Design

Separate Rubber and Metal Components: Air springs typically consist of natural rubber (the flexible portion) and metal end caps (the rigid portion). Rubber is a vulnerable component, enduring long-term inflation and deflation cycles, flexing, and aging, while metal components have a longer lifespan. This separate design allows for separate rubber replacement.

Removable Connection: The rubber is secured to the metal end caps via bolts, clamps, or vulcanized adhesive. If the connection structure is intact (e.g., removable bolts and the vulcanized layer is intact), simply replacing the rubber can restore sealing and elasticity.

2. Economical and Maintenance Efficiency

Cost Savings: Metal components (such as end caps) are expensive to manufacture, and replacing them en masse is a waste of resources. Replacing the rubber alone reduces maintenance costs.

Quick Repair: Removing the old rubber and installing a new one is faster than replacing the entire assembly, reducing equipment downtime.

3. Technical Feasibility

Standardized Production: Industrial rubber typically has uniform specifications (e.g., diameter, mounting interface), ensuring that the new rubber fits the existing metal component.

Independent Functional Testing: After replacement, a pressure test can be performed to verify the seal without adjusting the entire system.

4. Application Scenario Requirements

Differences in Operating Conditions: Rubber may fail due to UV rays, ozone, or mechanical wear, while metal components are less susceptible to damage due to corrosion or fatigue.

Customized Repair: In some scenarios, it is necessary to retain specific metal structures and replace only the rubber to accommodate new load or height requirements.

Notes

Compatibility Check: The new rubber must match the original system's pressure rating and temperature range (e.g., weather resistance from -40°C to 70°C).

Installation Procedure: Improper installation may result in air leaks (e.g., uneven tightening of clamps). Manufacturer specifications must be followed.

Metal Component Condition: If the end cap is deformed or the piston is corroded, the entire component must be replaced.

Product Picture

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.