PU Backing Padel Court Paddle Court Construction Customized Color

Padel Court Specifications

To ensure compliance with the International Padel Federation (FIP) standards and to meet player expectations, understanding the basic requirements of a padel court is essential:

• Dimensions:

  • A standard padel court for doubles measures 10 meters wide by 20 meters long (internal playing area).

  • A minimum clearance of 0.5 meters is required on each side, resulting in a total area of at least 11 x 21 meters (231 square meters).

  • For singles play, the width is reduced to 6 meters, with the same length, requiring a minimum area of 11 x 7 meters.

• Height:

  • Indoor courts require a minimum ceiling height of 6 meters, with 8 meters recommended for advanced play to accommodate high lobs.

  • Outdoor courts do not have height restrictions but must ensure proper drainage to prevent water accumulation.

• Surface:

  • The playing surface is typically artificial grass laid over a concrete or asphalt base, offering good ball response and durability.

• Walls:

  • The court is enclosed by 4-meter-high walls made of tempered glass (10-12 mm thick) and metal mesh. The back walls are 3 meters of glass with an additional 1 meter of metal fencing, while side walls may step down to 2 meters towards the center.

• Net:

  • A nylon net, 10 meters long, divides the court, with a height of 92 cm at the sides and 88 cm at the center, supported by posts.

Planning and Design

Proper planning is critical to the success of a padel court construction project:

• Site Selection:

  • Choose a location with sufficient space (at least 231 square meters for a doubles court).

  • Ensure the site is level or can be leveled easily, and consider additional space for spectator areas or access pathways.

• Environmental Considerations:

  • Select a site that minimizes environmental disruption. Use eco-friendly materials, such as recycled glass for walls or energy-efficient LED lighting, to reduce the ecological footprint.

  • For outdoor courts, ensure effective drainage to handle rainwater.

• Permits and Regulations:

  • Obtain necessary building permits from local authorities, ensuring compliance with zoning laws and building codes.

  • Adhere to FIP standards for competitive play, especially if the court will host tournaments.

• Budgeting:

  • Costs vary based on materials, location, and additional features. On average, expect to spend between $24,000 and $65,000 for a standard padel court, though costs can range from $17,500 to $91,200 depending on specific choices.

Construction Steps

Building a padel court involves several key stages, each requiring careful execution:

1. Site Preparation:

   • Clear the site of debris, vegetation, or obstacles.

   • Excavate and level the ground to ensure a stable base.

   • Add a sub-base layer of gravel or sand to improve drainage and stability.

2. Foundation Construction:

   • Pour a concrete or asphalt base, typically 10 cm thick, ensuring it is level and free of imperfections.

   • For outdoor courts, quick-dry asphalt can enhance drainage.

   • Professional contractors are recommended for this step due to the need for specialized equipment.

3. Drainage Installation:

   • Install a drainage system to prevent water accumulation, particularly for outdoor courts, to ensure safety and longevity.

4. Enclosure and Walls:

   • Erect the metal framework and install tempered or laminated glass panels for the walls, ensuring they meet safety standards.

   • Add metal mesh above the glass where required, following FIP specifications.

5. Playing Surface Installation:

   • Lay padel-specific artificial grass over the base, ensuring it is durable, UV-resistant, and provides good traction.

   • Add silica sand to the turf to enhance stability and playability.

6. Net Installation:

   • Install posts and attach the nylon net, ensuring it is taut and at the correct height (92 cm at sides, 88 cm at center).

7. Ancillary Features:

   • Install LED lighting for evening or indoor play, ensuring sufficient illumination without glare.

   • Add optional features like spectator seating, changing rooms, or refreshment areas to enhance the facility.

8. Final Inspection:

   • Verify that all components (walls, net, surface, lighting) meet safety and FIP standards before opening the court for use.