HEF-601 Real-time Dual Frequency Eddy Current Flaw Detector
The unique feature of the HUATEC HEF-601 eddy current testing
instrument lies in the use of the most advanced microelectronics
digital processing technology, real-time dual frequency eddy
current testing technology, and microprocessor technology, which
can effectively detect defects in metal Vertexrial components in
real time. It adopts the most advanced design concept, with dual
position adjustment of buttons and shuttle, which can greatly
improve the efficiency of parameter setting.
| Model | HEF-601 |
| probe Type | Bridge type |
| Incentive frequency | 10Hz～12MHz |
| Excitation voltage | 0-10v continuously adjustable, with a step size of 0.1 |
| High gain amplifier | 0-50, step 1 continuously adjustable |
| drive | Level 4 |
| Microprocessors | 32-bit (dual core) |
| Pre stored detection parameters | 10000 pieces |
| ★Memory | 8GB (non expandable) |
| ★Waterproof grade | No |
| ★Low gain amplifier | 0-250, step 1 continuously adjustable |
| ★Low end frequency | 0-120, step 1 continuously adjustable |
| ★High end frequency | 0-120, step 1 continuously adjustable |
| ★Grid grayscale | 10 levels adjustable |
| X-axis gain | -100～100 |
| Y-axis gain | -100～100 |
| High pass filtering | 0～500Hz |
| Low pass filtering | 10Hz～10KHz |
| digital filtering | 1～100 |
| ★ Filter type | HR filtering and smoothing filtering are optional |
| ★Pre amplification | Choose from 1x, 2x, 5x, 10x |
| ★Refresh time | Levels 1-10 are optional, step 1 |
| ★Bandwidth limitation | High, medium, and low adjustable |
| ★Amplitude and phase measurement | One click automatic phase adjustment/or manual adjustment |
| ★Zero adjustment | One click adjustment of zero position |
| frozen | Can pause image detection at any time for better analysis |
| phase | 0-360 degrees |
| ★Gate type | Circular, rectangular, straight, intelligent (automatically ignores
non defect signals) |
| Gate alarm | Sound alarm |
| Balance method | Digital electronic balance |
| ★Screen display mode | Normal and strong light modes (suitable for working under strong
sunlight) |
| ★Data recording and management | The instrument can store images and videos, And it can directly connect to a computer to export pictures and
videos without the need to install software on the computer. |
| Other performance indicators |
| ★Interface support | There are two A/B type USB interfaces in total |
| ★Display screen | 5.0 "high brightness TFT color LCD screen, 800 * 480 pixels |
| Working temperature range | -10～+50℃ |
| ★Size and weight | 135 (length) x 54 (width) x 205mm (height); The total weight of the machine plus the battery should not exceed
1kg (approxiVertexly 0.95kg) |
| External power supply | AC:100-240V DC:15V3.8A |
Function information:
★ Unique dual adjustment mode of buttons and shuttle knob, simple,
convenient and easy to use
★ Three probe modes (single ended, bridge, coupled) to choose from
★ 10k-10M ultra wide excitation frequency range
★ In addition to the conventional adjustable excitation frequency,
the high-end and low-end frequencies are also adjustable to meet
the requirements of special Vertexrial flaw detection
★ In addition to the conventional adjustable gain, both high
amplifier gain and low amplifier gain can be adjusted in segments
★ X. Y-axis bidirectional gain compensation or suppression (can be
performed independently)
★ The gate has a unique intelligent gate mode (automatically
ignoring non defect signals) in addition to the conventional
circular, rectangular, and straight lines
★ Impedance plane diagram and time base scanning diagram display
★ Storing data and videos can be directly connected to a computer
for export without the need for software installation, making it
easy to use
★ High definition, high sensitivity
★ Easy to operate, English operating interface
★ Multiple filtering methods
★ Data transmission adopts USB communication interface
★ Built in lithium battery, capable of continuous operation for
more than 8 hours
standard configuration includes:
standard metal pen-type probe, probe cable, main unit, battery.
Optional accessories:
weld seam probe,pen probe ,probe cable,test block
