Product Description:
I. Basic Working Attributes
Operating Principle
Based on pulse jet technology, it instantly releases compressed air
through electromagnetic or pneumatic control to form high-speed
pulse airflow, which cleans the filter bags/cartridges and removes
attached dust.
Control Methods
Electromagnetic control: The valve port is quickly opened/closed by
the solenoid valve receiving electrical signals, with a fast
response speed (millisecond level).
Pneumatic control: Driven by a pneumatic control valve, it is
suitable for high-pressure and harsh environments (such as
high-temperature and corrosive occasions).
II. Core Technical Parameters
Working Pressure
Usually 0.4-0.7MPa (special models can adapt to higher pressures).
Pressure stability directly affects the blowing force and ash
cleaning effect.
Blowing Volume and Blowing Time
Blowing volume: The amount of compressed air released in a single
time (related to the valve port diameter and pressure), which needs
to match the size of the filter bag/cartridge.
Blowing time: Generally 0.05-0.2 seconds, which can be adjusted
through the control system. If it is too short, the ash cleaning
will be incomplete; if it is too long, energy will be wasted.
Response Time
The time from receiving the signal to fully opening is usually ≤50
milliseconds. A fast response can reduce compressed air loss and
increase the ash cleaning frequency.
Interface Size
The pipe diameters of the air inlet and air outlet (connected to
the blowing pipe). Common specifications include DN20, DN25, DN32,
etc. (or inch specifications 1/2", 3/4", etc.), which need to match
the system pipeline.
Working Medium
Dry and clean compressed air (oil content ≤0.5ppm, water content
≤-40℃ dew point) to avoid blockage or corrosion of the valve body
by impurities.
III. Environmental Adaptability Attributes
Working Temperature
Regular models: -10℃~60℃ (electromagnetically controlled).
High-temperature models: Can adapt to above 150℃ (need to use
high-temperature resistant sealing materials and valve body
materials).
Corrosion Resistance
The valve body material can be cast iron, aluminum alloy (with
surface anti-corrosion treatment), or stainless steel (304/316).
Stainless steel models are suitable for humid and corrosive
environments (such as chemical industry and waste incineration
industries).
Protection Level
The protection level of the electromagnetic coil part is usually
IP65 (dust-proof and protected against low-pressure water
spraying), and some models can reach IP67, adapting to working
conditions with more dust.
IV. Structural and Material Attributes
Valve Body Structure
It adopts a diaphragm structure (the core component is an elastic
diaphragm). The valve port is opened/closed through the rapid
deformation of the diaphragm, which has the characteristics of good
sealing, low wear, and long service life.
Diaphragm Material
Common materials are nitrile rubber (NBR, oil-resistant and
wear-resistant) and fluororubber (FKM, high-temperature resistant
and chemical corrosion resistant). The selection depends on the
working medium and temperature.
Technical Parameters:
| Operating pressure | 0.1~0.8MPa |
| Voltage | DC24V AC110V AC220V |
| Degree of protection | IP65 |
| Valve body | Die Cast Aluminum Alloy |
| Ambient Temperature | -30°C/+40°C |
| Working medium | Clean Air |
Applications:
Pulse Jet Valves by TURBO are versatile products suitable for a
wide range of applications and scenarios due to their high quality
and reliable performance. These Diaphragm Valves are essential
components in pulse dust removal systems, making them ideal for
industries such as cement, power generation, food processing, and
more.
Manufactured in China, these Pulse Jet Valves bear the CE
certification, ensuring compliance with international standards for
safety and quality. Customers can order as little as 1 valve, with
pricing available for negotiation based on requirements. The
packaging details include carton packaging or customized options as
per the clients' needs.
With a swift delivery time of 1-7 work days after payment,
customers can rely on TURBO for prompt service. Payment terms
accepted include T/T, Western Union, and Paypal, offering
flexibility and convenience. The supply ability of 5000 pieces per
month guarantees a steady availability of these essential Solenoid
valve pulse dust removal valves.
Constructed with a durable die-cast aluminum alloy valve body,
these Pulse Jet Valves are designed to withstand the demands of
industrial environments. They are suitable for working with clean
air at operating pressures ranging from 0.1 to 0.8MPa. The IP65
degree of protection ensures resistance to dust and water ingress,
making them suitable for diverse conditions.
Whether in extreme temperatures ranging from -30°C to +40°C or in
applications requiring efficient pulse dust removal, TURBO's Pulse
Jet Valves excel in performance and reliability. From small-scale
operations to large industrial settings, these valves offer a
dependable solution for efficient dust removal and system
maintenance.
Packing and Shipping:
Product Name: Pulse Jet Valves
Description: High-quality pulse jet valves for industrial
applications.
Package Includes: 1 Pulse Jet Valve
Shipping Method: Standard Shipping
Shipping Cost: $5.99
