Industrial IEEE802.3af/at PoE Splitter with 2-port switch function,
output voltage 12VDC
Product Advantages
► Splits power and data from PoE Input
► 1-port PoE Power+ Data input
► 2-port Data output (Switch function)
► 1 DC Out + 1 DC In (5-pin Terminal Block)
► Able to work with 12VDC input no PoE
► Support IEEE802.3af/at PoE
► Support 10/100/1000Base-TX
► Distance up to 100 meters
► Supports output power up to 20W
► 12VDC output voltage
► Short-circuit protection for power output
► IP40 rugged metal housing and fanless
► Support DIN-Rail & Wall-mount installation.
► Extensive LED indicators for PoE diagnostics
► Wide operating temperature -40 ~ 80°C
Overview
LNK-SPL01 series is an Industrial Grade, Gigabit Ethernet, PoE
Splitter, designed to deliver data, via RJ-45 Ethernet connector,
and electrical power, via screw terminal block, to non-PoE devices.
This device saves the high cost of running separate electrical
service to edge devices.
Technical Indexes
Ethernet |
Standards: | IEEE 802.3 10Base-T Ethernet |
IEEE 802.3u 100Base-TX Fast Ethernet |
IEEE 802.3ab 1000Base-T Gigabit Ethernet |
IEEE802.3af Power over Ethernet |
IEEE802.3at Power over Ethernet |
Processing Type: | Forward |
Half-duplex, Full-duplex |
Forward Filter Rate: | 1,488,000pps (1000Mbps) |
Cabling: | 1000Base-T: Cat5 or above |
Maximum Distance: | Cat5 UTP up to 100m |
Interface: | “PoE (Power + Data)” Input Port: 1 x RJ-45 10/100/1000Base-T |
“Data” Out Port: 2 x RJ-45 10/100/1000Base-T |
DC Out/In Plug Connector: 1 removable 5-Pin terminal block |
Power over Ethernet |
PoE Standard: | IEEE 802.3af/at Power over Ethernet |
Number of devices that can be powered: | 1 (DC12V) (Vary on device’s power requirement; cannot be over 20 watts.) |
Environmental |
Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
Relative Humidity: | 5% to 95% non-condensing |
MTBF: | >200,000hrs |
Electrical and Mechanical |
Power Output: | 20W 12VDC (Terminal Block) |
Power Consumption: | 25W Max. |
LED Indicators: |
PWR: | Power ON |
POE/12V: | PSE Power IN, 12VDC Power OUT |
Dimensions (WxDxH): | 95 x 70 x 30 mm |
Weight: | 0.25Kg |
Casing: | Aluminum Case |
Mounting Options: | DIN-Rail / Wall-mount |
Regulatory Approvals |
ISO9001 |
FCC part 15, Class A |
EN55022:2006+A1: 2007 Class A |
Surge Protection: |
RJ45: 1KV |
Power: 500V |
ESD: 4KV/8KV |
Model | Description |
LNK-SPL01 | Industrial PoE splitter with 2-port Switch function: 1-port PoE+ In + 2-port Ethernet Data Out (switch function), maximum output of 20 W at 12VDC, Support DIN-Rail mounting and Wall mounting installation, -40 to
80°C operating temperature |
Mounting Options | ► Default DIN-Rail Bracket installed; Wall Mount Bracket is
included. |
Power Options | ► 20W 12VDC output with 2-pin open wire terminal block |
