8K DisplayPort 1.4 Fiber Extender Kit (7680x4320@60Hz) over LC
Single Mode Simplex up to 300m / 985ft - Transmitter & Receiver
with RS232 + Bi-DIR IR Support
Advantages
Support resolution up to 8K (7680x4320@60Hz)
Uncompressed and zero latency transmission
Extend DP1.4 signal over single core optical fiber up to 300m
Support IR remote control and RS232
Adopt CWDM (coarse wavelength division multiplexing) optical fiber technology
AUX adopts transparent transmission mode, has good compatibility
Support FEC, solve the compression video output to external display moderate
fault tolerance
Support HDR (High Dynamic Range) metadata transmission
Plug-and-play operation for quick setup and immediate use
Overview
DP1.4 fiber extender adopts CWDM optical fiber technology, which multiplexes optical
signals of 6 different wavelengths in a single fiber for
transmission, and really realizes transmission of an uncompressed DP1.4 video signal in a single fiber.
Bullet Point
【985Ft DP1.4 signal Extension】The DP1.4 optical fiber converter can extend 8K video and audio signal from a DisplayPort (DP) source device to a DP monitor up to 985ft away via single mode single core optical fiber
【High Compatibility】Support ultra HD video resolutions up to 7680x4320@60 Hz and compatible backwards with lower resolution. Compatible with
almost any audio format and overrides such as 32-bit audio channels
【Uncompressed Transmission】DP fiber extender extends 8Kx4K DP signal without delay and losses. Adopt DSC display compression stream technology to support the
refresh rate of 240Hz under 4K and 60Hz under 8K
【Support RS232 and Bi-Di IR】RS232 Port for control signal transmission, you can control the RS232 serial device from remote side and support extend IR signal from source to receiver or from transmitter to
receiver
【Unique Design】The DisplayPort1.4 fiber extender adopts harden aluminum material and can be used in changeable environment. Plug and play, setup without any software installation. Convenient to operate
Specifications
Standard: Compatible with DP1.4 and HDCP2.2 protocol
Model: LDP14-601s01-T/R
Fiber Connector: LC single mode simplex
DisplayPort Interface: DP1.4 female
DP Signal Type: TMDS
IR interface: 3.5mm earphone seat
IR Remote Control Frequency: 38kHz (NEC)
RS232 Baud rate: Backward Self-adaptive, Max:115200bps
Resolution: 8k/5k/4k/2k/1080p
Transmission distance: Max 990Ft (300m)
Bandwidth: 32.4Gbps
Power Input: DC 12V
Case Material: Aluminum
Dimension: 5.51*3.35*1.02in (140*85*26mm)
Item Weight: 0.99lb*2 (450g*2)
Operating Temperature: -10℃ ~ +60℃ (14℉~140℉)
Storage Temperature: -40℃ ~ +85℃ (-40℉~185℉)
Application
DisplayPort1.4 fiber extender is suitable for smart home audio and video management system, HD public display video transfer and point-to-point HD video
transmission. It’s recommended for video presentations in conference rooms, schools,
trade shows, meeting facilities, houses of worship, retail settings
and digital signage applications where the source and display are
farther apart than conventional A/V cables allow.
