DIN-Rail Industrial 10/100Base-TX Ethernet over Coax Extender
Product Advantages
· Transmit 10/100 Mbps Full Duplex Ethernet up to 1200m (without PoE)
or 300m (with PoE)
· Transmission Media: Coaxial Cable(Best), 586B, CAT5e/6
· Input Voltage: DC18V~48V (POE: DC48V).
· Support Power over Coax & Power over Ethernet at same time.
· 2pc BNC design, support to connect Max. 7 channels branch line
· Operation: Use the existing network, easy to install, Plug & Play.
Convenient and efficient.
· Code Standard: abide by IEEE802.3 10/100 base-TX Ethernet standard
protocol
· Advanced 128-bit AES encrypted transmission and PoE+ power
technology
· Excellent Protection: Built-in transient protection; industrial
temperature range. Excellent lightning protection and strongly
Anti-interference, surge protection.
Overview
The LNK-DEC110 Series DIN-Rail Ethernet over Coaxial Converter is a
new designed Ethernet Extender Device. This Device is designed to
extend Ethernet Network signal and Power over existing coaxial
cable, and able to live transmit multi-channel Power + Network date
signal, the Max distance is up to 1200M(Power: 300M). 2pc BNC
design supports to connect 2 channel branch lines at same time.
Technical Indexes
Ethernet |
Standards | IEEE802.3 10Base-T |
IEEE802.3u 100Base-TX |
IEEE802.3af Power Over Ethernet |
IEEE802.3at Power Over Ethernet |
Cabling | 10Base-T: Cat 3,4,5, or above |
| 100Base-TX: Cat5 or above |
Maximum Distance | Cat5UTP up to 100m |
Connector | 1 x RJ45 |
Coaxial |
Cabling | Coaxial Cable (75 ohm) |
Connector | 1 BNC (female) |
Distance | Up to 1200m (no PoE), 300m (with PoE) |
Data Rate |
Downlink (TX to RX) | 90Mbps (Max.) |
Uplink (RX to TX) | 90Mbps (Max.) |
Technology | Power Line Communication (PLC) |
Protection |
Reverse Polarity | Present |
Electrical and Mechanical |
Input Power | DC18V~48V (PoE: DC48V) |
Power Consumption | 8W Max. (PoC not in use) |
60W Max. (Poc in use) |
LED Indicators |
Power (Power) | RED (Power On: keep lighting; Power Off: lighting off) |
Coax (Cable Link) | GREEN (Flicker: signal transmission) |
Ethernet | SPD, LINK/ACT, PoE(Transmitter) |
PoE |
Standard | IEEE802.3af/at |
Mode | B Mode |
Port | RJ45 |
Max. Power Per Port | 25.5W max.at RX(Powered Device) |
30W Max.at TX(Power Souring Equipment) |
Mode | Positive(VCC+): RJ45 Pin 4,5 |
Negative(VCC-):RJ45 Pin 7,8 |
Dimensions (W x D x H) | 95 × 67 × 30 mm |
Weight | 0.5kg |
Casing | Aluminum case |
Environmental |
Operation Temperature | -10˚C to 60˚C (14˚F to 140˚F) |
Storage Temperature | -40˚C to 85˚C (-40˚F to 185˚F) |
Relative Humidity | 5% to 90% non-condensing |
MTBF | > 100,000 hrs |
Regulatory Approvals | ISO9001 FCC Part 15 Class A EN55022 Class A Surge Protection RJ45: 1KV BNC: 2KV Power: 500V |
Odering Informationa2.jpg
Model | Description |
LNK-DEC110-T/R | DIN-Rail EoC Converter, 1200m transmission distance, including Transmitter and Receiver, not including power supply adapter |
LNK-DEC110P-T/R | DIN-Rail EoC Converter with PoE+, 300m transmission distance, including Transmitter and Receiver, not including power supply adapter |
