Industrial temperature range 1Ch DIN-Rail Industrial 10/100Base-TX
Ethernet over Coax Extender
1Ch DIN-Rail Industrial 10/100Base-TX Ethernet over Coax Extender Advantages
► Transmit 10/100 Mbps Full Duplex Ethernet up to 1200m
► Transmission Media: Coaxial Cable(Best), 586B, CAT5e/6
► Input Voltage: DC18V~48V.
► 2pc BNC design, support to connect Max. 7 channels branch line
► Operation: Use the existing network, easy to install, Plug & Play.
Convenient and efficient.
► Excellent Protection: Built-in transient protection; industrial
temperature range. Excellent lightning protection and strongly
Anti-interference, surge protection.
1Ch DIN-Rail Industrial 10/100Base-TX Ethernet over Coax Extender Overview
LNK-DEC110 Series DIN-Rail Ethernet over Coaxial Converter is a new designed Ethernet Extender Device. This Device is designed
to extend Ethernet Network signal and Power over existing coaxial
cable, and able to live transmit multi-channel Power + Network date
signal, the Max distance is up to 1200M. 2pc BNC design supports to connect 2 channel branch lines at same time.
The total power of electricity is 100W, each BNC max is 50W.
Network max baud-rate is up to 100Mbps. It has excellent lightning protection and Anti-interference.
Inbuilt Industry level intelligent auto-monitoring module (this
function is optional), this function can make the device
intelligent detect circuit individually, all time automatically
detect network communication link exceptional situation.
If any link is abnormal, it make the device recover to link the
communication automatically, ensure the network communication link
data transmission stably. Really realize never loss network
connection, never crash industry network transmission. Guarantee
the security of surveillance zone.
1Ch DIN-Rail Industrial 10/100Base-TX Ethernet over Coax Extender Technical Indexes
Ethernet |
Standards | IEEE802.3 10Base-T |
| IEEE802.3u 100Base-TX |
Cabling | 10Base-T: Cat 3,4,5, or above |
| 100Base-TX: Cat5 or above |
Maximum Distance | Cat5UTP up to 100m |
Connector | 1 x RJ45 |
Coaxial |
Cabling | Coaxial Cable (75 ohm) |
Connector | 1 BNC (female) |
Distance | Up to 1200m (no PoE) |
Data Rate |
Downlink (TX to RX) | 90Mbps (Max.) |
Uplink (RX to TX) | 90Mbps (Max.) |
Technology | Power Line Communication (PLC) |
Protection |
Reverse Polarity | Present |
Electrical and Mechanical |
Input Power | DC18V~48V |
Power Consumption | 8W Max |
1Ch DIN-Rail Industrial 10/100Base-TX Ethernet over Coax Extender Ordering Information
Model | Description |
LNK-DEC110-T/R | DIN-Rail EoC Converter, 1200m transmission distance, including Transmitter and Receiver, not including power supply adapter |
