5U Rack Mount 4K DVI KVM Fiber Optic Extender
Advantages
· Support 5U rack
· Real Time Transmission
· Supports DVI 1.0 and HDMI v1.4
· Supports resolutions up to 3840*2160/30p, 4096x2160/30p,
3840*2160/60P(YCbCr 420), 4096*2160/60P(YCbCr 420)
· Supports 3840*2160/30p resolution with color depth up to 24
bits/pixel
· Supports bit-rates up to 3.4 Gbps/color,10.2 Gbps total
· HDCP 1.4 compliant
· Support 3D TV pass-through
· CEC are NOT supported!
· Support EDID pass-through
· Support USB Keyboard and USB Mouse
· LPCM 7.1, Dolby® TrueHD, and DTS-HD Master Audio™
· Plug and Play
· Built-in EQ(Receiver)
· Up to 300m distance by OM3-300(Custom Available)
· Low RFI / EMI profile for sensitive applications
· Surface-mountable
Overview
DVI (High-Definition Multimedia Interface) recently has become increasingly popular in the application of
video and audio transmission system. In view of the extreme of
electrical performances, however, the traditional copper wire cable
imposes limits on signal transmission distance and signal quality.
In reality, optical fiber is of low dispersion, which in turn has
the strength of longer signal transmission distance and better
signal transmission quality in comparison to the traditional copper
wire cable. DVI extender uses 2 cores fiber without any copper wire
inside, where radio frequency interference phenomenon is literally
ruled out, which shows the advantage of high performance and good
signal quality as well as low cost.
High Performance — The LNK-4KDVI-2240 series is a high performance 4K DVI KVM Fiber Optic Extender that
transmits high resolution DVI signals over extreme distances using
2 cores fiber. This extender supports HDMI v1.4 signals with
resolutions up to 4K (4096x2160 / 30p) over cable distances up to
300m.
Fiber Optic Extension — The extender set consists of an optical transmitter module that
converts the DVI signals into light pulses for transmission over a
2 cores fiber. An optical receiver module converts the light pulses
back to a DVI signal for display on a monitor or projector.
Cutting-Edge Optics — Most single-fiber optical extenders transmit signals over
multiple optical wavelengths, which can suffer from chromatic
dispersion over long cable runs. To avoid this issue, this extender
employs a cutting-edge, high-speed SerDes that combines the DVI
signal channels into a single uncompressed 10.3 Gbps bit stream.
This enables the optical transmission of the signal over a single
optical wavelength, which provides increased signal fidelity,
stability and flawless image quality, regardless of cable length.
These features make the LNK-4KDVI-2240 series the ideal
future-proof choice for systems designers and integrators who need
to transmit high resolution DVI signals over extreme distances.
Application
· Digital Signage
· LED signboards in streets and in stadiums
· Medical Imaging Equipment
· Airplane On-board Video System
· Conference Room Video Equipment
· Remote monitor for traffic, industrial, military control
· LCD, Projector, Plasma display connection
· Large video wall system
Item | Description |
|
LNK-4KDVI-2240 | Card Type 4K DVI KVM Fiber Optic Extender with KVM, including 1 sender & 1 receiver, used by pairs |
LNK-5U-DVI | 16-slot 5U Rack for 4K DVI KVM Fiber Extender |
Picture
