5-30mm Drilling Diameter Range 3D CNC H Beam Drilling Tapping And Sawing Machine Line BT40 Drilling Spindle

5-30mm Drilling Diameter Range 3D CNC H Beam Drilling Tapping And Sawing Machine Line BT40 Drilling Spindle

Purpose of the production line:

This production line is primarily designed for drilling, marking, sawing, and cutting of steel materials such as H-shaped steel and channel steel.

The drilling main machine utilizes 3 BT40 high-speed spindles to perform drilling operations on the three surfaces of the steel, with one spindle allocated to each surface. The corresponding row-type tool magazine can accommodate up to 4 tool specifications. It is capable of converting CAD drawings into processing programs and enabling multi-thread synchronous operation, which allows for the rational arrangement of tasks such as drilling, workpiece movement, tool change, and spindle positioning. This makes it possible to complete two or three of these tasks simultaneously, significantly enhancing production efficiency.

The sawing main machine employs a band saw to cut the steel to a fixed length.

This production line is equipped with a reserved communication interface, facilitating customers' future system management of the production line.

1. Three-dimensional drilling feeding trolley

It is composed of gears, servo motors and manipulators. The manipulator has good rigidity and stability, can automatically rise and fall according to the profile specifications, and automatically clamp the workpiece. After the manipulator clamps the workpiece, it is driven by the servo motor. Under the transmission of the gear rack, the workpiece is fed in the X direction to ensure the longitudinal processing accuracy of the drilling.

2. Three-dimensional drilling host

The drilling host mainly consists of a base, a bed, a mobile slide, a spindle box, an upper pressing device, a side clamping device and a row tool magazine.

The bed has good rigidity and stability, can withstand the load and vibration generated by high-speed processing, and ensure the accuracy of the machine tool.

There are 3 spindle boxes installed on the drilling host, namely the fixed side, the mobile side and the upper unit spindle box, which are used for horizontal and vertical drilling respectively. Each spindle box can be operated independently or complete drilling operations at the same time, which greatly improves production efficiency. Each spindle box has a set of BT40 high-speed mechanical spindles, and the corresponding row-type tool magazine can install up to 4 diameters of drill bits (when there is no tool on the spindle), and can automatically process 4 different hole diameters when the workpiece is clamped at one time.

The spindle feed is driven by a servo motor, and fast forward, working forward, and fast reverse can be achieved through program control; the spindle motor is driven by a spindle servo motor, and the speed is steplessly adjusted with a wide speed regulation range.

The three spindle box units are hung on the bed side, and each spindle box unit is driven by two sets of servo motors to achieve horizontal and vertical movement of the spindle box, which is driven by a ball screw and guided by a precision linear rolling guide. This equipment presses the workpiece in two directions during the drilling process. There is a cylinder-driven pressing mechanism above the workpiece to press the workpiece against the horizontal support roller, and there is a cylinder-driven pressing mechanism on the side to press the workpiece from the side.

3. 3D drilling discharge channel

It is composed of a reducer, a channel support, a support roller, a side positioning roller, a chain, etc.
The sawing discharge channel is used to carry the workpiece after sawing. The reducer drives the support roller to drive the workpiece to move along the X direction.

Main Specifications:

Jinan Auten Machinery Co., Ltd. is a professional company dedicated in developing, studying, designing, manufacturing, and selling cnc machines, such as cnc angle punching machine line, cnc angle drilling machine line, cnc plate punching machine, cnc plate drilling machine, cnc H beam drilling machine, cnc beam band sawing machine, cnc plate roller forming machine, cnc pipe cutting machine, cnc plate plasma cutting machine, cnc grinding machine, electric power fittings and so on. Jinan Auten Machinery Co., Ltd. is affiliated with Jinan CNC Machine Group of Evershining. There are about 200 staffs, the company was established in 2003, the company’s annual turn over is about 15 million USD. The customers are world-widely distributed in many countries.

We have a great engineer team and owns so much more advanced technology for cold roll forming industry, steeltower industry and steel structure industry. Main business is metal forming machine, cnc angle processing machine, cnc H beam processing machine, cnc plate processing machine, cnc pipe processing machine, cnc cutting machine, cnc grinding machine, electric power fittings and so on.

The main feature of the company is serving best quality machines with reasonable price and best service after sales. Our company insists the product principle of "do the new ones, do the good ones " and the enterprise aim of "trustworthiness, cooperation, study, and innovation ". The company sets up the service principle of "to focus customer as work center", to satisfy customized request, with high-quality, trustworthiness service and continuous innovation to raise customer's satisfaction, to become the best cooperative colleague of the customers. Each step of the developments of the company all comes from the customer's trust and support, the company is always using the professional to create new brighter future together with customers all over the world.